HOW TO USE YOUR CLEANING SYSTEM
Read these instructions and learn how to use your cleaning system before you attempt to start your cleaning system. If you have any problems operating your cleaning system, please call the pressure washer helpline at
How To Use the Adjustable Nozzle
AsprayingARNING:. NeverNeverput adjusthands sprayin frontpatternof the whennozzle when adjusting the spray.
•Push the nozzle forward for low pressure_ Pull the nozzle backward until it "snaps" into place {o
achieve high pressure.
Pull nozzle | Push nozzle forward |
backward for high | for low pressure. |
pressure. |
|
•Twisting the nozzle adjusts the spray pattem from a narrow to a =fan" pattern.
Twist nozzle | Twist | nozzle |
clockwise for | counterclockwise for | |
narrow spray. | "fan" | pattern. |
For most effective cleaning, keep spray nozzle
between 8 to 24 inches away from cleaning surface.
Damage to the surface may occur if you get spray nozzle too close to it.
Cleaning With The Adjustable Nozzle and Applying Chemical
IMPORTANT: Use soaps designed specifically for pressure washer cleaning systems. Household detergents could damage the pump.
IMPORTANT: You must attach all hoses before you
start the engine. Starting the engine without all the hoses connected and without the water turned ON will
damage the pump.
Up to three (3) different solutions can be carried on the cleaning system at one time. To apply detergent follow these steps:
•Dilution is necessary when using the supplied chemical packets. Simply snip one comer of the
plastic pouch, pour the chemical into the tank, then fill the tank with clean water. Label tanks with the
provided tank labels.
Pour chemical into one of the tanks labeled A, B, C.
If using another chemical designed for use with pressure washers, prepare the chemical solution as required by the chemical manufacturer. Fill
chemical reservoir(s) with the prepared solution as needed.
•Rotate the
•Push the adjustable nozzte forward to tow pressure mode. Detergent cannot be applied with nozzle in high pressure position.
•Review the use of the adjustable nozzle.
•Connect garden hose to water inlet, check that high pressure hose is connected to spray gun and pump (see ASSEMBLY on page 4), and start engine.
Connect garden hose here.
CAUTION:System,makeBeforesurestartingyouhaveyourreadCleaningandfollowed the instructionsin the sections =Before Starting the Cleaning System" on page 7 and "To Start the Cleaning System" on page 8.
6
