MINIMUM WIRE GAUGE
RECOMMENDATIONS
Cord
Recessed
100FT.
A. IW4G.*
*American Wire Gauge
Secure the extension cord to the unit by threading the cord through the cord re- tainer (see illustration). Insert the cord
receptacle into the recessed plug. CAUTION: Failure to use cord retain-
er could result in damage to the unit, extension cord, or both.
Receptacl_
°°tl,
KNOW YOUR ELECTRIC BLOWER
READ THIS OPERATOR'SMANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations to your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
ON/OFF Switch .
|
|
|
| Collection Bag |
Cord | ( _'_'_ | Air Vents |
| |
|
|
|
| Elbow |
|
|
|
| Tube |
Retainer?____ ( | \t | I |
| |
HR:nad, | _ |
| Upper Vacuum Tube |
|
|
| Inlet Cover | Retaining Post |
|
|
| Latch | Vacuum Assist Handle | |
|
|
|
| |
|
|
| Upper Vacuum Tube |
|
|
|
| Blower Tube |
|
|
|
| Lower Vacuum Tube |
|
|
|
| _,// | =::==:::=i |
/
ON/OFF SWITCH
The ON/OFF SWITCH is used to acti- vate the motor.
INLET COVER LATCH
The INLET COVER LATCH is used to
open and close the inlet cover and to secure the upper vacuum tube to the blower unit.
BLOWER TUBE
The BLOWER TUBE is designed to di- rect the flow of air.
INLET RESTRICTOR
The INLET RESTRICTOR improves the blower function.
TUBE RELEASE BUTTON
Tile TUBE RELEASE
blower unit during operation. Also,
pressing the tube release button allows removal of the blower tube or elbow
tube.
VARIABLE SPEED CONTROL
The VARIABLE SPEED CONTROL is de- signed to allow an increase or de- crease in motor speed as necessary during blower use only. To avoid caus- ing damage to the unit, DO NOT at- tempt to use the variable speed control during vacuum use.
8
