Craftsman 247.775870 Remove CHIPPER-SHREDDER, From Carton, Loose Parts, Tools Required

REMOVE CHIPPER-SHREDDER

Carton Contents

FROM CARTON

•Cut the corners of the carton.

•Remove all packing inserts.

•Remove all loose parts including owner's manual. See figure 1.

•Roll chipper-shredder out of the carton.

•Make certain all parts and literature have been removed before the carton is discarded.

Hopper

Discharge Chute

Catcher Bag

__Bottle Chipper Chute

of Oii

•You will find the hopper in the top insert inside the carton.

Figure 1

IMPORTANT: This unit is shipped without gasoline or oil in the engine. After assembly, see OPERATION section of this manual for proper fuel and engine oil fill-up.

NOTE: To determine right and left hand sides of your chipper-shredder,stand behind the unit with the engine farthest away from you.

Your chipper-shredder has been completely assembled at the factory, except for the hopper assembly, discharge chute and the catcher bag.

These parts are shipped loose in the carton. A pair of safety glasses and a bottle of oil are also included in the carton.

LOOSE PARTS

(Refer to figure 1.)

a.Hopper Assembly

b.Discharge Chute

c.Catcher Bag

d.Bottle of Oil

e.Safety Glasses (not shown in figure 1)

f.Owner's Manual (not shown in figure 1)

g.Chipper Chute

TOOLS REQUIRED

1.1/2" or Adjustable Wrenches

2.7/16" or Adjustable Wrenches

3.9/16" or Adjustable Wrenches

4.Funnel

DISCONNECTING SPARK PLUG

Disconnect the spark plug wire and move it away from the spark plug before assembling the chipper-shredder. See figure 2.

Spark

Wire

Figure 2

5