OO

@

O

\- L00LLN6TAB

LINE FEED

AS you use the trimmer, the string will get shorter due to wear. Gently bump the hub on the ground and the line will feed.

&CAUTION: ALWAYS WEAR EYE PROTECTION.

&CAUTION:

Inspect

area to be trimmed

0

and remove any wire, cord, or string-like

objects which could

become entangled

in the rotating line or spool. Be particularly careful to avoid any wire which might be bent outwardly into the path of the tool, such as barbs at the base of a chain link fence.

1.Angle unit as shown in Figure 7.

2.Slowly swing trimmer side-to-side as shown in Figure 8.

3.To convert for maintenance edging (Figure 9) unplug from power source, depress conversion button and rotate the motor housing. When the button snaps back into place, the tool is rocked in the edger position.

4.To operate as a maintenance edger, position trimmer above sidewalk as shown in Figure 10.

5, Return to trimming position by

 

unplugging

tool, depressing the

7

button and

rotating back.

 

5

Page 5
Image 5
Craftsman 900-74522 instruction manual Line Feed