Craftsman 917.25651 Service And Adjus Ents, Tractor, Place gearshift lever in neutral N position

Models: 917.2565 917.25651

1 56
Download 56 pages 11.63 Kb
Page 20
Image 20
SERVICE AND ADJUS ENTS

SERVICE AND ADJUS ENTS

............................................iii

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

o

O

o

o

o

Depress clutchlbrake pedal fully and set parking brake.

Place gearshift lever in neutral (N) position.

Place attachment clutch in "DISENGAGED" position.

Turn ignition key "OFF" and remove key.

 

Make sure the blades and all moving parts

have completely stopped.

Disconnect spark plug wire from spark plug

and place wire where it cannot come in contact with

plug,

.................................

iiii ilmlml

 

 

 

TRACTOR

 

 

CLUTCH LEVER

TO REMOVE MOWER (See Fig. 16)

 

CLUTCH ROD

RETAINER

 

 

 

 

SPRING

Mower witl be easier to remove from the right side of tractor

 

 

ENGINE

o Place attachment clutch in "DISENGAGED"

position.

SUSPENSION

 

ARMS

 

 

 

 

°Move attachment lift lever forward to lower mower to its lowest position.

o Roll belt off engine pulley_

Disconnect clutch rod from clutch lever by removing retainer spring.

°Disconnect anti-sway bar from chassis bracket by removing retainer spring..

F

Disconnect suspension arms from rear deck brackets by removing retainer springs.+

,Disconnect front links from deck by removing retainer springs.

°Raise lift lever'to raise suspension arms Slide mower out from under tractor

IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER IS TO BE MOUNTED TO THE TRACTOR, THE R.H+AND L.H+ SUSPENSION ARMS MUST BE REMOVED FROM TRACTOR

RETAINER

SPRING

ANTI+SWAY BAR

RETAINER

SPRINGS

(BOTH SIDES)

FIG. 16

TO INSTALL MOWER (See Fig. 16)

°Raise attachment lift lever to its highest position.

oSlide mower under'tractor with discharge guard to right side of tractor.

+Lower lift lever to its lowest position..

. Install mower in reverse order of removal instructions.

20

Page 20
Image 20
Craftsman 917.25651 Service And Adjus Ents, Tractor, Place gearshift lever in neutral N position, have completely stopped