.m.
,ACABTION: Before performing any service or adjustments:
•[}epress clutch/brake pedal fully and set parking brake.
•Place gearshift lever in neutral (N) position.
•Place attachment clutch in "DISENGAGED" position.
•Turn ignition key'OFF" and removekey.
•Make sure the blades and all movingparts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
TO REMOVE MOWER
Mower will be easier to remove from the right sid8 of tractor.
•Place attachment clutch in "DISEN- GAGED" position.
•Move attachment lift lever forward to lower mower to its lowest position.
•Roll
•Disconnect clutch rod from clutch lever by removing retainer spring.
•Disconnect
•Disconnect suspension arms from rear deck brackets by removing retainer spri_ngs..........
Clutch
Clutch Rod
Suspension
Arms
•Disconnect front links from deck by removing retainer springs.
•Raise liftlever to raise suspension arms. Slide mower out from under trac- tor.
IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links.
TO INSTALL MOWER ,
•Raise attachment lift lever to its highest position.
•Slide mower under tractor with dis- charge guard to right side of tractor.
•Lower lift lever to its lowest position.
•Install mower in reverse order of removal instructions.
Retainer
Spring
Engine Pulley
Front
Unk
\
Retainer Springs
(Both Sides)
Springs
(Both Sides)
Retainer
Spdng
22
