TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT

The motion control lever has been preset at the factory and adjustment should not be necessary.

1.Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

2.Start engine and move motion control lever until tractor does not move

forward or backward.

3.Hold motion control lever in that position and turn engine off.

4.While holding motion control lever in place, loosen the adjustment bolt.

5.Move motion control lever to the neutral (N) (lock gate) position.

6.Tighten adjustment bolt securely. NOTE: If additional clearance is needed

to get to adjustment bolt, move mower deck height to the lowest position. After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

1.Loosen the adjustment bolt.

2.Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

3.Tighten adjustment bolt securely.

4.Start engine and test.

5.If tractor still creeps, repeat above steps until satisfied.

Motion Control Lever

Neutral

 

Lock Gate

\ Adjustment Bolt

TRANSMISSION REMOVAL/REPLACE- MENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See "PURGE

TRANSMISSION" in the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGN- MENT

If steering wheel crossbars are not horizontal (left to dght) when wheels are positioned straight forward, remove steering wheel and reassemble with crossbars horizontal. "13ghten securely.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are

not adjustable on your tractor. If damage has occurred to affect the front wheel too-

in or camber, contact a Sears or other qualified service center.

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, purchase and use tire sealant from Sears. 13re sealant

also prevents tire dry rot and corrosion.

Washers

Retaining

Ring

Axle

Cover

i

Square Key

(Rear Wheel Only)

TO START ENGINE WITH A WEAK BA'n'ERY

_WARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BAI-rERY" in the MAINTENANCE section of this manual).

If "jumper cables" are used for emergency starting, follow this procedure:

IMPORTANT: Your tractor is equipped wi_ a 12 volt system. The other vehicle must also be

a12 volt system. Do not use your tractor battery to start other vehicles.

TO ATFACH JUMPER CABLES -

1.Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

2.Connect one end of the BLACK cable

to the NEGATIVE (-) terminal (C) of

26 fully charged battery.

Page 26
Image 26
Craftsman 917.2720601 manual Transaxle Motion Control Lever Neutral Adjustment, Transmission REMOVAL/REPLACE- Ment

917.2720601 specifications

The Craftsman 917.2720601 is a standout lawn tractor that combines robust functionality with user-friendly features, making it a go-to choice for many homeowners looking to maintain their yards efficiently. With its powerful performance and innovative technologies, this model is designed to enhance the mowing experience while ensuring durability and reliability.

One of the main features of the Craftsman 917.2720601 is its engine. Powered by a reliable 19 horsepower Briggs & Stratton engine, it provides ample power to efficiently cut through thick grass and tackle various landscaping tasks. The engine is equipped with an automatic choke system, ensuring easy starts in various weather conditions.

The cutting deck plays a crucial role in the effectiveness of any lawn tractor, and the 917.2720601 does not disappoint. It features a 42-inch cutting deck, which allows for a wide cutting path, reducing the time spent mowing large areas. The deck height can be easily adjusted with a simple lever, providing six different height positions. This feature allows users to achieve the perfect cut, whether they prefer a manicured look or a more natural appearance.

One of the standout technologies integrated into this lawn tractor is the Easy Access battery and fuel system. This design enhances user convenience by allowing quick access for maintenance checks and fuel refills. Additionally, with its hydrostatic transmission, the Craftsman 917.2720601 offers smooth and reliable speed control, making it easy for users to navigate different terrains without any hassle.

Comfort is also a priority with this model. The tractor features an adjustable high back seat, designed to provide optimum support during prolonged use. Large, durable wheels ensure stability and traction on uneven ground, enhancing the overall mowing experience.

Safety features are another important aspect of this tractor. It includes a safety switch that prevents operation when the seat is unoccupied, reducing the risk of accidents. The easy-to-use controls are intuitively designed, allowing even novice users to operate the tractor with confidence.

In conclusion, the Craftsman 917.2720601 is a well-rounded lawn tractor that offers a combination of power, versatility, and comfort. With its robust engine, efficient cutting deck, user-friendly features, and safety technologies, it's an ideal choice for anyone looking to achieve a beautifully maintained lawn with ease. Whether for small or large yards, this tractor is equipped to meet a variety of mowing needs.