5.Make sure belt is in all pulley grooves and inside all belt guides and keepers.

6.Install mower (See "TO INSTALL MOWER" in this section of manual).

Engine Pulley--

[A

Center

Clutching Idler j

Keeper

Stationary Idler

Transaxle

TRANSAXLE GEAR SHIFT LEVER NEU- TRAL ADJUSTMENT

The transaxle should be in neutral when

the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

1.Make sure transaxle is in neutral (N). NOTE: When the tractor rear wheels move

freely, the transaxle is in neutral.

2.Loosen adjustment bolt in front of the right rear wheel.

3.Position the gear shift lever in the neu- tral (N) position.

4.Tighten adjustment bolt securely. NOTE: If additional clearance is needed

to get to adjustment bolt, move mower deck height to the lowest position.

Neutral Lock Gate

Gearshift

.....

,,,

Adjustment Bolt

TO ADJUST STEERING WHEEL ALIGN-

MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble with crossbars horizontal. Tighten securely.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not

adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or

camber, contact a Sears or other qualified service center.

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align

grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent

flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant

also prevents tire dry rot and corrosion. Washers

Retaining

Ring\

Axle \

I

Square Key _

(Rear Wheel Only)

TO START ENGINE WITH A WEAK BAT- TERY

_IWARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from bat-

teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BAT-

TERY" in the MAINTENANCE section of this manual).

If "jumper cables" are used for emergency starting, follow this procedure:

IMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles.

TO ATTACH JUMPER CABLES -

1.Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

24

Page 24
Image 24
Craftsman 917.27537 owner manual Transaxle Gear Shift Lever NEU- Tral Adjustment, To Adjust Steering Wheel Align Ment

917.27537 specifications

The Craftsman 917.27537 is a high-performance lawn mower that offers an array of features and technologies designed to provide a superior cutting experience. This riding mower is well-suited for homeowners with medium to large-sized lawns, boasting a robust engine and efficient cutting capabilities.

At the heart of the Craftsman 917.27537 is a powerful 19 horsepower Briggs & Stratton engine. This engine has been specifically engineered for reliability and durability, ensuring that it can handle the rigors of mowing while providing consistent performance. The automatic transmission allows for smooth operation, enabling users to easily navigate their lawn without the need for constant gear shifting.

One of the standout features of the Craftsman 917.27537 is its 42-inch cutting deck. This wide cutting path is designed to efficiently cover more ground in a single pass, reducing mowing time and providing a cleaner cut. The cutting deck is crafted from high-quality materials to withstand wear and tear, ensuring longevity and durability over time. Additionally, the mower offers 6 height adjustment positions, allowing users to customize their grass cutting height to achieve the desired look of their lawn.

The mower is equipped with a built-in mulching capability, which is essential for maintaining a healthy lawn. By finely chopping the clippings and redistributing them back onto the lawn, it provides essential nutrients to the soil, promoting a lush and vibrant lawn. Furthermore, the side discharge feature helps to expel clippings efficiently, preventing clumps on the lawn.

User comfort is also a priority with the Craftsman 917.27537. The mower features an ergonomic seat and easy-to-reach controls, making it comfortable for extended mowing sessions. The inclusion of an easy-start ignition system means that users can get the mower up and running with minimal effort.

The Craftsman 917.27537 also emphasizes safety, with features like an automatic shut-off function that engages when the operator leaves the seat, ensuring peace of mind while mowing. The sturdy construction combined with modern engineering makes this model a reliable choice for home gardening enthusiasts looking for a high-quality lawn mower. Overall, the Craftsman 917.27537 is an exceptional option for anyone in search of efficiency, ease of use, and cutting technology.