TO INSTALL MOWER

1.Raiseattachmentlift leverto its highest position.

2.Slidemower undertractor with deflec- tor shield to right side of tractor.

3.Lowerlift leverto its lowestposition.

4.Connectfront links to mowerdeck and securewith retainersprings.

5.Connectsuspensionarms to rear deck bracketsand secure with retainer springs.

6.Connectanti-swaybar to chassis bracketandsecure with retainerspring.

7.Push clutch cablehousingguide into bracket,slidecollar onto guide and securewith large retainerspring.

8.Placeflat washerandclutch springon idler pulleybolt and securewith small retainerspring.

9.Install belt onto engine pulley.

TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure

tires are properly inflated (See "PROD-

UCT SPECIFICATIONS" section of this

manual). If tires are over or underinflated,

you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT

•Raise mower to its highest position.

•At the midpoint of both sides of mower, measure height from bottom edge of

mower to ground. Distance "A" on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjust- ment on one side of mower only.

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift

link adjustment nut on that side.

NOTE: Each full turn of adjustment nut will change mower height about 1/8".

• Recheck measurements after adjusting.

Bottom edge

 

Bottom edge of

of mower to r--_

_

n3o_w,er to ground

ground \ / [!_f!

I/

Arm

@,,,_

Lift Link N_

Adjustment

FRONT-TO-BACK ADJUSTMENT

IMPORTANT: Deck must be level side-to side. If the following front-to-back adjust- ment is necessary, be sure to adjust both

front links equally so mower will stay level side-to-side.

To obtain the best cutting results, the mower housing should be adjusted so

that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in

its highest position.

Check adjustment on right side of trac- tor. Measure distance "D" directly in front and behind the mandrel at bottom edge of mower housing as shown.

•Before making any necessary adjust- ments, check that both front links are equal in length.

•If links are not equal in length, adjust one link to same length as other link.

•To lower front of mower loosen nut "E" on both front links an equal number of turns.

•When distance "D" is 1/8" to 1/2"

lower at front than rear, tighten nuts "F" against trunnion on both front links.

•To raise front of mower, loosen nut "F" from trunnion on both front links. Tighten

nut "E" on both front links an equal num- ber of turns. The two front links must

remain equal in length.

•When distance "D" is 1/8" to 1/2" lower

at front than rear, tighten nut "F" against trunnion on both front links.

•Recheck side-to-side adjustment.

_Mandrel

Both Front Links Should be ual in Length

/01267

Nut

_E _

 

Trunnion

Front Links

22

Page 21 Page 23
Page 22
Image 22
Craftsman 917.27537 owner manual To Level Mower Housing, SIDE-TO-SIDE Adjustment, FRONT-TO-BACK Adjustment
Page 21 Page 23

917.27537 specifications

The Craftsman 917.27537 is a high-performance lawn mower that offers an array of features and technologies designed to provide a superior cutting experience. This riding mower is well-suited for homeowners with medium to large-sized lawns, boasting a robust engine and efficient cutting capabilities.

At the heart of the Craftsman 917.27537 is a powerful 19 horsepower Briggs & Stratton engine. This engine has been specifically engineered for reliability and durability, ensuring that it can handle the rigors of mowing while providing consistent performance. The automatic transmission allows for smooth operation, enabling users to easily navigate their lawn without the need for constant gear shifting.

One of the standout features of the Craftsman 917.27537 is its 42-inch cutting deck. This wide cutting path is designed to efficiently cover more ground in a single pass, reducing mowing time and providing a cleaner cut. The cutting deck is crafted from high-quality materials to withstand wear and tear, ensuring longevity and durability over time. Additionally, the mower offers 6 height adjustment positions, allowing users to customize their grass cutting height to achieve the desired look of their lawn.

The mower is equipped with a built-in mulching capability, which is essential for maintaining a healthy lawn. By finely chopping the clippings and redistributing them back onto the lawn, it provides essential nutrients to the soil, promoting a lush and vibrant lawn. Furthermore, the side discharge feature helps to expel clippings efficiently, preventing clumps on the lawn.

User comfort is also a priority with the Craftsman 917.27537. The mower features an ergonomic seat and easy-to-reach controls, making it comfortable for extended mowing sessions. The inclusion of an easy-start ignition system means that users can get the mower up and running with minimal effort.

The Craftsman 917.27537 also emphasizes safety, with features like an automatic shut-off function that engages when the operator leaves the seat, ensuring peace of mind while mowing. The sturdy construction combined with modern engineering makes this model a reliable choice for home gardening enthusiasts looking for a high-quality lawn mower. Overall, the Craftsman 917.27537 is an exceptional option for anyone in search of efficiency, ease of use, and cutting technology.
Top Page Image Contents