TO REPLACE MOWER BLADE DRIVE

BELT

The mower blade drive belt may be re- placed without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

1.Remove mower from tractor (See "TO REMOVE MOWER" in this section of

manual).

2.Work belt off both mandrel pulleys and idler pulleys.

3.Pull belt away from mower.

BELT INSTALLATION -

1.Work belt around both mandrel pulleys and idler pulleys

2.Make sure belt is in all pulley grooves and inside all belt guides.

3.Install mower (See "To Install Mower" in this section of this manual).

Mandrel

Idler Pulleys

Mandrel

Pulley

TO CHECK AND ADJUST BRAKE

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

1.Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and engage parking brake.

2.Place gear shift lever in neutral (N)

position.

The rear wheels must lock and skid when you try to manually push the tractor for- ward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

1.Depress clutch/brake pedal all the way down and engage parking brake.

,Measure distance between brake oper- ating arm and nut "A" on brake rod.

3.If distance is other than 1-1/2", loosen

jam nut and turn nut "A" until distance becomes 1-1/2". Retighten jam nut against nut "A".

,Road test tractor for proper stopping distance as stated above. Readjust

if necessary. If stopping distance is still greater than five (5) feet in highest

gear, further maintenance is neces- sary. Replace brake pads or contact a Sears or other qualified service center.

With Parking Brake"Engaged"

Nut "A"

Jam Nut

Arm

00238

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

1.Remove mower (See "TO REMOVE

MOWER" in this section of manual). NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

2.Remove belt from stationary idler and clutching idler.

3.Remove belt downward from around engine pulley.

4.Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keepers.

5.Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

1.Carefully work new belt down between transaxle belt keepers and onto the input pulley.

2.Slide belt into the center span keeper.

3.Pull belt toward front of tractor and roll around the top groove of engine pulley.

4.Install belt through stationary idler and clutching idler.

23

Page 23
Image 23
Craftsman 917.27537 owner manual To Replace Mower Blade Drive Belt

917.27537 specifications

The Craftsman 917.27537 is a high-performance lawn mower that offers an array of features and technologies designed to provide a superior cutting experience. This riding mower is well-suited for homeowners with medium to large-sized lawns, boasting a robust engine and efficient cutting capabilities.

At the heart of the Craftsman 917.27537 is a powerful 19 horsepower Briggs & Stratton engine. This engine has been specifically engineered for reliability and durability, ensuring that it can handle the rigors of mowing while providing consistent performance. The automatic transmission allows for smooth operation, enabling users to easily navigate their lawn without the need for constant gear shifting.

One of the standout features of the Craftsman 917.27537 is its 42-inch cutting deck. This wide cutting path is designed to efficiently cover more ground in a single pass, reducing mowing time and providing a cleaner cut. The cutting deck is crafted from high-quality materials to withstand wear and tear, ensuring longevity and durability over time. Additionally, the mower offers 6 height adjustment positions, allowing users to customize their grass cutting height to achieve the desired look of their lawn.

The mower is equipped with a built-in mulching capability, which is essential for maintaining a healthy lawn. By finely chopping the clippings and redistributing them back onto the lawn, it provides essential nutrients to the soil, promoting a lush and vibrant lawn. Furthermore, the side discharge feature helps to expel clippings efficiently, preventing clumps on the lawn.

User comfort is also a priority with the Craftsman 917.27537. The mower features an ergonomic seat and easy-to-reach controls, making it comfortable for extended mowing sessions. The inclusion of an easy-start ignition system means that users can get the mower up and running with minimal effort.

The Craftsman 917.27537 also emphasizes safety, with features like an automatic shut-off function that engages when the operator leaves the seat, ensuring peace of mind while mowing. The sturdy construction combined with modern engineering makes this model a reliable choice for home gardening enthusiasts looking for a high-quality lawn mower. Overall, the Craftsman 917.27537 is an exceptional option for anyone in search of efficiency, ease of use, and cutting technology.