Check Operator Presence System, Blade Care

TRACTOR

Alwaysobservesafety ruleswhen per- forming any maintenance.

BRAKE OPERATION

If tractor requiresmore than five (5) feetto stopat highestspeedin highestgear on a level,dry concreteor pavedsurface,then brakemust be checkedand adjusted.(See "TOADJUSTBRAKE"in the Serviceand

Adjustmentssection of this manual).

TIRES

•Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

•Keep tires free of gasoline, oil, or insect control chemicals which can harm rub- ber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM AND REVERSE OPERATION SYSTEM (ROS) Be sure operator presence and reverse operation systems are working properly. If your tractor does not function as de- scribed, repair the problem immediately.

•The engine should not start unless the

brake pedal is fully depressed, and the attachment clutch control is in the disen-

gaged position.

CHECK OPERATOR PRESENCE

SYSTEM

•When the engine is running, any at- tempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

•When the engine is running and the attachment clutch is engaged, any at- tempt by the operator to leave the seat should shut off the engine.

•The attachment clutch should never op- erate unless the operator is in the seat.

ROS "ON" Position Engine "ON" Position (Normal Operating)

CHECK REVERSE OPERATION (ROS) SYSTEM

•When the engine is running with the ig- nition switch in the engine "ON" position and the attachment clutch is engaged, any attempt by the operator to shift into reverse should shut off the engine.

•When the engine is running with the ignition switch in the ROS "ON" position

and the attachment clutch is engaged, any attempt by the operator to shift into reverse should NOT shut off the engine.

BLADE CARE

For best results mower blades must be kept sharp. Replace bent or damaged blades.

A CAUTION: Use only a replacement blade approved by the manufacturer of your tractor. Using a blade not approved by the manufacturer of your tractor is hazardous, could damage your tractor and void your warranty.

BLADE REMOVAL

1.Raise mower to highest position to al- low access to blades.

2.Remove blade bolt, lock washer and flat washer securing blade.

3.Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Reassemble blade bolt, lock washer and flat washer in exact order as shown.

5.Tighten blade bolt securely (27-35 Ft.

Lbs. torque).

IMPORTANT: Blade bolt is heat treated.

If bolt needs replacing, replace only with approve bolt shown in the Repair Parts.

Trailing		Mandrel As: _embly
Edge Up_	Blade	Centel
		Centel
Flat
Lock Washer	_
	_-Blade Bolt
TO SHARPEN BLADE

NOTE: We do not recommend sharp-

ening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause

excessive vibration and eventual damage to mower and engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

917.27537 specifications

The Craftsman 917.27537 is a high-performance lawn mower that offers an array of features and technologies designed to provide a superior cutting experience. This riding mower is well-suited for homeowners with medium to large-sized lawns, boasting a robust engine and efficient cutting capabilities.

At the heart of the Craftsman 917.27537 is a powerful 19 horsepower Briggs & Stratton engine. This engine has been specifically engineered for reliability and durability, ensuring that it can handle the rigors of mowing while providing consistent performance. The automatic transmission allows for smooth operation, enabling users to easily navigate their lawn without the need for constant gear shifting.

One of the standout features of the Craftsman 917.27537 is its 42-inch cutting deck. This wide cutting path is designed to efficiently cover more ground in a single pass, reducing mowing time and providing a cleaner cut. The cutting deck is crafted from high-quality materials to withstand wear and tear, ensuring longevity and durability over time. Additionally, the mower offers 6 height adjustment positions, allowing users to customize their grass cutting height to achieve the desired look of their lawn.

The mower is equipped with a built-in mulching capability, which is essential for maintaining a healthy lawn. By finely chopping the clippings and redistributing them back onto the lawn, it provides essential nutrients to the soil, promoting a lush and vibrant lawn. Furthermore, the side discharge feature helps to expel clippings efficiently, preventing clumps on the lawn.

User comfort is also a priority with the Craftsman 917.27537. The mower features an ergonomic seat and easy-to-reach controls, making it comfortable for extended mowing sessions. The inclusion of an easy-start ignition system means that users can get the mower up and running with minimal effort.

The Craftsman 917.27537 also emphasizes safety, with features like an automatic shut-off function that engages when the operator leaves the seat, ensuring peace of mind while mowing. The sturdy construction combined with modern engineering makes this model a reliable choice for home gardening enthusiasts looking for a high-quality lawn mower. Overall, the Craftsman 917.27537 is an exceptional option for anyone in search of efficiency, ease of use, and cutting technology.

Craftsman 917.27537 Check Operator Presence System, Check Reverse Operation ROS System

Models: 917.27537