5.ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring.
6.Repeat on opposite side of tractor.
7.ATTACH FRONT LINK (E) - Work from left side of tractor. Insert rod end of link
assembly through front hole in tractor front suspension bracket (F).
8.Insert end of link (E) into hole in front mower bracket (H) and secure with washer and retainer sprinq ('J_.
9.Push clutch cable housing guide (P) into bracket, slide collar (L) onto guide and secure with retainer spring (K).
10.Hook end of clutch cable spring (Q) into hole in idler arm (R).
11.Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper rout- ing in all mower pulley grooves.
03042
©
22
