BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

1.Check engine oil with tractor on level ground.

2.Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, remove and read oil level. If necessary, add oil until

"FULL' mark on dipstick is reached. Do not overfill.

•For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual).

•To change engine oil, seethe Maintenance section in this manual.

ADD GASOLINE

•Fill fuel tank to bottom of filler neck. Do not overfill. Usefresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase

carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to ensure fuel freshness.

A_ILOAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: When operating in tem- peratures below 32°F(0°C), use fresh, clean winter grade gasoline to help ensure good cold weather starting.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Usefresh fuel next season. See Storage Instructions

for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

1.Ensure freewheel control is in the trans- mission engaged position.

2.Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

3.Place motion control lever in neutral position.

4.Move attachment clutch to disengaged position.

5.Move throttle control to choke position. NOTE: Before starting, read the warm and cold starting procedures below.

6.Insert key into ignition and turn key clockwise to start position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute. If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and try again. If engine still does not start, move the throttle control back to the choke position and retry.

WARM WEATHER STARTING (50°F/10°C and above)

7.When engine starts, move the throttle

control to the fast position.

•The attachments and ground drive can now be used. Ifthe engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING (50°F/10°C and below)

7.When engine starts, leave throttle control in choke position until engine warms up and begins to run roughly. Once rough

running begins, immediately move the throttle control to the fast position. Engine warm-up may take from several seconds to several minutes (the colder the tem- perature, the longer the warm-up).

AUTOMATIC TRANSMISSION WARM UP

Before driving the unit in cold weather, the

transmission should be warmed up as fol- lows:

1.Ensure the tractor is on level ground.

2.Placethe motion control leverin neutral. Release the parking brake

and let the clutch/brake slowly return to operating position.

3.Allow one minute fortransmission to warm up. This can be done during

the engine warm up period.

•The attachments can also be used dur- ing the engine warm-up period after the

transmission has been warmed up. NOTE: If at a high altitude (above 3000 feet)

or in cold temperatures (below 32°F/0°C) the carburetor fuel mixture may need to be

adjusted for best engine performance (see

"TO ADJUST CARBURETOR" in the Service

and Adjustments section of this manual).

14

Page 13 Page 15
Page 14
Image 14
Craftsman 917.289244 Before Starting the Engine, To Start Engine, Automatic Transmission Warm UP, Check Engine OIL Level
Page 13 Page 15

917.289244 specifications

The Craftsman 917.289244 is a highly regarded lawn tractor that combines reliability and performance, making it an excellent choice for homeowners with moderate to large-sized lawns. This model stands out due to its robust build, user-friendly design, and versatile features.

One of the key characteristics of the Craftsman 917.289244 is its powerful engine. This tractor typically features a 17.5-horsepower Briggs & Stratton engine, delivering ample power to tackle various mowing tasks efficiently. The engine also includes technologies such as automatic choke, which simplifies starting procedures, enabling users to get the job done without hassle.

The cutting deck on the Craftsman 917.289244 is another notable feature. With a 42-inch cutting width, it allows for swift mowing while ensuring an even cut across your lawn. The deck's height can be adjusted, providing users with the flexibility to choose the desired grass length, accommodating different types of grass and seasonal requirements.

Equipped with a hydrostatic transmission, this lawn tractor offers smooth and easy operation. The hydrostatic drive allows for variable speed control, enabling users to maneuver the tractor effortlessly across varying terrains. This technology ensures that the rider can focus on mowing without worrying about shifting gears, making the experience more enjoyable.

Comfort is also a priority in the design of the Craftsman 917.289244. The adjustable seat is padded and provides a suitable level of support for extended periods of use. The ergonomic steering wheel is designed for ease of handling, reducing operator fatigue during lengthy mowing sessions.

Additionally, this model includes convenient features such as a built-in cup holder, providing users with a place to keep their beverages while they work. The easy-access external fuel tank simplifies refueling, allowing for quick stops during longer mowing tasks.

In terms of storage and maintenance, the Craftsman 917.289244 is designed to be user-friendly. Its durable construction, coupled with accessible components, makes maintenance straightforward. With a comprehensive manual available, users can perform necessary upkeep to ensure longevity and peak performance.

Overall, the Craftsman 917.289244 is a well-rounded lawn tractor that successfully combines power, comfort, and practicality. Its impressive features and technologies make it a reliable choice for homeowners looking to maintain their lawns effectively. With thoughtful design elements and efficient performance, it stands out as a versatile lawn care solution.
Top Page Image Contents