Craftsman 917.289244 owner manual To Replace Mower Blade Drive Belt

Models: 917.289244

1 128
Download 128 pages 52.45 Kb
Page 88
Image 88

TO REPLACE MOWER BLADE DRIVE BELT

The mower blade drive belt may be replaced without tools. Park the tractor on level sur-

face. Engage parking brake.

BELT REMOVAL-

1.Remove mowerfrom tractor (See"TO RE- MOVE MOWER"inthissection ofmanua0.

2.Work belt off both mandrel pulleys and idler pulleys.

3.Pull belt away from mower.

BELT INSTALLATION -

. Work belt around both mandrel pulleys and idler pulleys

2.Ensure belt is in all pulley grooves and inside all belt guides.

3.Install mower (See "To Install Mower" in this section of this manual).

MandrelIdler

PullePulle

Mandrel

2.Pull belt toward front of tractor and roll belt onto engine pulley (E).

3.Pull belt toward rear of tractor. Carefully work belt down around transmission

cooling fan and onto the input pulley (D). Ensure belt is inside the belt keeper.

4.Install belt on centerspan idler (C).

5.Install belt through stationary idler (A) and clutching idler (B).

6.Ensure belt is in all pulley grooves and inside all belt guides and keepers.

7.Install mower (See "TO INSTALL MOW- ER" in this section of manual).

03043

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a

belt installation guide decal on bottom side of left footrest.

BELT REMOVAL-

1. Remove mower (See "TO REMOVE MOWER" in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

2.Remove beltfrom stationary idler (A) and clutching idler (B).

3.Remove belt from centerspan idler (C).

6.Pull belt slack toward rear of tractor.

Carefully remove belt upwards from

transmission input pulley and over cool-

ing fan blades (D).

4. Remove belt downward from engine pulley (E).

5.Slide belt toward rear of tractor, off the steering plate (F) and remove from tractor.

BELT INSTALLATION -

1.Install new belt from tractor rear to front, over the steering plate (F) and above

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

1.Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

2.Disengage transmission by placing

freewheel control in "transmission dis-

engaged" position. Pull freewheel control out and into the slot and release so it is

held in the disengaged position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a Sears or other qualified service center.

FRONT WHEEL TOE-IN/CAMBER

Your new tractor front wheel toe-in and cam- ber is set at the factory and is normal. The front wheel toe-in and cam ber are not adjust- able. If damage has occurred to affect the factory set front wheel toe-in or camber, con- tact a Sears or other qualified service center.

clutch brake pedal shaft (G).

24

 

Page 88
Image 88
Craftsman 917.289244 owner manual To Replace Mower Blade Drive Belt

917.289244 specifications

The Craftsman 917.289244 is a highly regarded lawn tractor that combines reliability and performance, making it an excellent choice for homeowners with moderate to large-sized lawns. This model stands out due to its robust build, user-friendly design, and versatile features.

One of the key characteristics of the Craftsman 917.289244 is its powerful engine. This tractor typically features a 17.5-horsepower Briggs & Stratton engine, delivering ample power to tackle various mowing tasks efficiently. The engine also includes technologies such as automatic choke, which simplifies starting procedures, enabling users to get the job done without hassle.

The cutting deck on the Craftsman 917.289244 is another notable feature. With a 42-inch cutting width, it allows for swift mowing while ensuring an even cut across your lawn. The deck's height can be adjusted, providing users with the flexibility to choose the desired grass length, accommodating different types of grass and seasonal requirements.

Equipped with a hydrostatic transmission, this lawn tractor offers smooth and easy operation. The hydrostatic drive allows for variable speed control, enabling users to maneuver the tractor effortlessly across varying terrains. This technology ensures that the rider can focus on mowing without worrying about shifting gears, making the experience more enjoyable.

Comfort is also a priority in the design of the Craftsman 917.289244. The adjustable seat is padded and provides a suitable level of support for extended periods of use. The ergonomic steering wheel is designed for ease of handling, reducing operator fatigue during lengthy mowing sessions.

Additionally, this model includes convenient features such as a built-in cup holder, providing users with a place to keep their beverages while they work. The easy-access external fuel tank simplifies refueling, allowing for quick stops during longer mowing tasks.

In terms of storage and maintenance, the Craftsman 917.289244 is designed to be user-friendly. Its durable construction, coupled with accessible components, makes maintenance straightforward. With a comprehensive manual available, users can perform necessary upkeep to ensure longevity and peak performance.

Overall, the Craftsman 917.289244 is a well-rounded lawn tractor that successfully combines power, comfort, and practicality. Its impressive features and technologies make it a reliable choice for homeowners looking to maintain their lawns effectively. With thoughtful design elements and efficient performance, it stands out as a versatile lawn care solution.