Craftsman 917.289244 owner manual To Remove Wheel for Repairs

Models: 917.289244

1 128
Download 128 pages 52.45 Kb
Page 89
Image 89

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, purchase and usetire sealant from Sears. Tire sealant also prevents tire dry rot and corrosion.

Washers

Retaining

Rin(

Axle

Cover

Square

Key _

(Rear Whee_-Q_

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT

The motion control lever has been preset atthe factory; adjustment should not be necessary.

1.Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

2.Start engine and move motion control lever until tractor does not move forward

or backward.

3.Hold motion control lever in that position and turn engine off.

4.While holding motion control lever in place, loosen the adjustment bolt.

5.Move motion control lever to the neutral (lock gate) position.

6.Tighten adjustment bolt securely.

Motion Control

Neutral

Lever

Lock

 

Gate

Y

Adjustment Bolt

NOTE: If additional clearance is needed to

get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the trac- tor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

1.Loosen the adjustment bolt.

2.Movethe motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

3.Tighten adjustment bolt securely.

4.Start engine and test.

5.If tractor still creeps, repeat above steps until satisfied.

TO START ENGINE WITH WEAK BATTERY

A_,WARNING: Lead-acid batteries gener-

ate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the

MAINTENANCE section of this manual).

If "jumper cables" are used for emergency starting, follow this procedure:

IMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles.

TO ATTACH JUMPER CABLES -

1.Connect one endofthe RED cable to the

POSITIVE (+) terminal of each battery(A-

B), taking care not to short against tractor chassis.

2.Connect one end of the BLACK cable

to the NEGATIVE (-) terminal (C) of fully charged battery.

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER-

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries.

Weak or

Fully

Dead

Charged

Battery

Battery

25

Page 89
Image 89
Craftsman 917.289244 owner manual To Remove Wheel for Repairs

917.289244 specifications

The Craftsman 917.289244 is a highly regarded lawn tractor that combines reliability and performance, making it an excellent choice for homeowners with moderate to large-sized lawns. This model stands out due to its robust build, user-friendly design, and versatile features.

One of the key characteristics of the Craftsman 917.289244 is its powerful engine. This tractor typically features a 17.5-horsepower Briggs & Stratton engine, delivering ample power to tackle various mowing tasks efficiently. The engine also includes technologies such as automatic choke, which simplifies starting procedures, enabling users to get the job done without hassle.

The cutting deck on the Craftsman 917.289244 is another notable feature. With a 42-inch cutting width, it allows for swift mowing while ensuring an even cut across your lawn. The deck's height can be adjusted, providing users with the flexibility to choose the desired grass length, accommodating different types of grass and seasonal requirements.

Equipped with a hydrostatic transmission, this lawn tractor offers smooth and easy operation. The hydrostatic drive allows for variable speed control, enabling users to maneuver the tractor effortlessly across varying terrains. This technology ensures that the rider can focus on mowing without worrying about shifting gears, making the experience more enjoyable.

Comfort is also a priority in the design of the Craftsman 917.289244. The adjustable seat is padded and provides a suitable level of support for extended periods of use. The ergonomic steering wheel is designed for ease of handling, reducing operator fatigue during lengthy mowing sessions.

Additionally, this model includes convenient features such as a built-in cup holder, providing users with a place to keep their beverages while they work. The easy-access external fuel tank simplifies refueling, allowing for quick stops during longer mowing tasks.

In terms of storage and maintenance, the Craftsman 917.289244 is designed to be user-friendly. Its durable construction, coupled with accessible components, makes maintenance straightforward. With a comprehensive manual available, users can perform necessary upkeep to ensure longevity and peak performance.

Overall, the Craftsman 917.289244 is a well-rounded lawn tractor that successfully combines power, comfort, and practicality. Its impressive features and technologies make it a reliable choice for homeowners looking to maintain their lawns effectively. With thoughtful design elements and efficient performance, it stands out as a versatile lawn care solution.