TRACTOR

Always observe safety rules when performing any maintenance.

BRAKE OPERATION

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced. (See "TO CHECK BRAKE" in the Service and Adjustments

section of this manual).

TIRES

Maintain proper air pressure in all tires (See the sides of tires for proper PSI).

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause

tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM AND REVERSE OPERATION SYSTEM (ROS)

Ensure operator presence and reverse operation systems are working properly. If your tractor does not function as described, repair the problem immediately.

The engine should not start unless the

brake pedal is fully depressed, and the attachment clutch control is in the disen-

gaged position.

CHECK OPERATOR PRESENCE SYSTEM

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the at- tachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never oper- ate unless the operator is in the seat.

CHECK REVERSE OPERATION (ROS) SYSTEM

When the engine is running with the ignition switch in the engine "ON" position and the attachment clutch engaged, any attempt by the operator to drive in reverse should shut off the engine.

When the engine is running with the ignition switch in the ROS "ON" position and the attachment clutch engaged, any attempt by the operator to drive in reverse should NOT shut off the engine.

BLADE CARE

For best results mower blades must be sharp. Replace worn, bent or damaged blades.

_, CAUTION: Use only a replacement

blade approved by the manufacturer of your tractor. Using a blade not approved by the

manufacturer of your tractor is hazardous, could damage your tractor and void your warranty.

BLADE REMOVAL

1.Raise mower to highest position to allow access to blades.

NOTE: Protect your hands with gloves and/ or wrap blade with heavy cloth.

2.Remove blade bolt by turning counter- clockwise.

3.Install new blade with stamped "GRASS SIDE" facing the ground.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Install and tighten blade bolt securely (45-55 Ft. Lbs. torque).

IMPORTANT: Special blade bolt is heat treated.

 

Star

Center Hole

\

Blade Bolt

Mandrel

(Special) "----._ _

Assembly

Blade

 

ROS "ON" Position Engine "ON" Position (Normal Operating)

17

Page 81
Image 81
Craftsman 917.289244 owner manual Tractor

917.289244 specifications

The Craftsman 917.289244 is a highly regarded lawn tractor that combines reliability and performance, making it an excellent choice for homeowners with moderate to large-sized lawns. This model stands out due to its robust build, user-friendly design, and versatile features.

One of the key characteristics of the Craftsman 917.289244 is its powerful engine. This tractor typically features a 17.5-horsepower Briggs & Stratton engine, delivering ample power to tackle various mowing tasks efficiently. The engine also includes technologies such as automatic choke, which simplifies starting procedures, enabling users to get the job done without hassle.

The cutting deck on the Craftsman 917.289244 is another notable feature. With a 42-inch cutting width, it allows for swift mowing while ensuring an even cut across your lawn. The deck's height can be adjusted, providing users with the flexibility to choose the desired grass length, accommodating different types of grass and seasonal requirements.

Equipped with a hydrostatic transmission, this lawn tractor offers smooth and easy operation. The hydrostatic drive allows for variable speed control, enabling users to maneuver the tractor effortlessly across varying terrains. This technology ensures that the rider can focus on mowing without worrying about shifting gears, making the experience more enjoyable.

Comfort is also a priority in the design of the Craftsman 917.289244. The adjustable seat is padded and provides a suitable level of support for extended periods of use. The ergonomic steering wheel is designed for ease of handling, reducing operator fatigue during lengthy mowing sessions.

Additionally, this model includes convenient features such as a built-in cup holder, providing users with a place to keep their beverages while they work. The easy-access external fuel tank simplifies refueling, allowing for quick stops during longer mowing tasks.

In terms of storage and maintenance, the Craftsman 917.289244 is designed to be user-friendly. Its durable construction, coupled with accessible components, makes maintenance straightforward. With a comprehensive manual available, users can perform necessary upkeep to ensure longevity and peak performance.

Overall, the Craftsman 917.289244 is a well-rounded lawn tractor that successfully combines power, comfort, and practicality. Its impressive features and technologies make it a reliable choice for homeowners looking to maintain their lawns effectively. With thoughtful design elements and efficient performance, it stands out as a versatile lawn care solution.