Read these instructions and this manual in | Operator | |||||
its entirety | before you attempt to assemble | |||||
| ||||||
or | operate | your | new lawn | mower, | control bar | |
IMPORTANT: This lawn mower is shipped |
| |||||
WITHOUT OIL OR GASOLINE in the |
| |||||
engine. |
|
|
|
| ||
Your new lawn mower has been assembled |
| |||||
at the factorywith the exception of those parts |
| |||||
left | unassembled | for shipping purposes. All | UP | |||
parts such as nuts, washers, bolts, etc., |
| |||||
necessary to complete the assembly have |
| |||||
been placed in the parts bag. To ensure safe |
| |||||
and proper operation of your lawn mower, all |
| |||||
parts and hardware you assemble must be |
| |||||
tightened securely. Use the correct tools as |
| |||||
necessary to ensure proper tightness. |
| |||||
TO | REMOVE | MOWER | FROM |
| ||
MOWING
POSITION
//i//
//
Upper handle
Handle knob
Lower handle
CARTON
1. Remove loose parts included with mower.
Handle
2. Cut down two end corners of carton
and lay end panel down flat.
bracket
3. Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle.
4. Roll moweroutofcarton and checkcarton Knob thoroughly for additional loose parts.
HOW TO SET UP YOUR MOWER
TO UNFOLD HANDLE
IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.
1.Raise lower handle section to operating position and align hole in handlewith one of three height positioning holes.
2.Insert handle bolt through handle and bracket and secure with knob.
3.Repeat for opposite side of handle.
4.Remove protective padding, raise up- per handle section into place on lower handle and tighten both handle knobs.
5.Remove any packing material from around control bar.
Your lawn mower handle can be adjusted for your mowing comfort. Refer to "AD- JUST HANDLE" in the Service and Adjust- ments section of this manual.
