HOW to USE Your Lawn Mower

The operation of any lawn SAFETVG'ASSESmower can result in foreign

objects thrown into the eyes, which can result in severe

eye damage. Always wear safety glasses or eye shields while oper- ating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses orwide vision safety mask worn over spectacles.

ENGINE SPEED

Engine speed was set at the factory for optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

_i, CAUTION: Federal regulations require

an engine control to be installed on this lawn mower in order to minimize the risk

of blade contact injury. Do not under

any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

•Your lawn mower is equipped with an operator presence control bar which

requires the operator to be positioned behind the lawn mower handle to start

and operate the lawn mower.

DRIVE CONTROL

. Self-propelling is controlled by holding the operator presence control bar down

to the handle and pulling either drive control lever rearward to the handle.

The further toward the handle a lever is pulled, the faster the unit will travel.

•Forward motion will stop when either the operator presence control bar or a drive control lever are released. To stop forward motion without stopping engine, release a drive control lever only. Hold operator presence control bar down against handle to continue mowing

without self-propelling.

NOTE: If after releasing the drive control the mower will not roll backwards, push the mower forward slightly to disengage drive wheels.

•To keep drive control engaged when turning corners, push down on the handle to lift the front wheels off the ground while turning lawn mower.

Operator presence control bar

control levers

TO ENGAGE DRIVE CONTROL

DRIVE CONTROL DISENGAGED

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may become "loose", resulting in decreased speed. There is a turnbuckle on the drive control housing to increase tension on the drive cable. Proceed as follows:

1.Turn unit off and disconnect spark plug wire from spark plug.

2.Rotate turnbuckle on drive control to increase drive speed.

3.Operate mower to test drive speed. Readjust as required.

4.If condition fails to improve after the above steps (forward speed remains the same), your drive belt is worn and should be replaced.

Adjustment turnbuckle

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit

your requirements. Medium position is best for most lawns.

•To change cutting height, pull up on adjuster lever, move wheel up or down

to suit your requirements and release adjuster lever. Be sure all wheels are in the same setting.

NOTE: Adjuster is	properly	positioned
when lever inserts	into hole	in plate.
LEVER BACKWARD
TO LOWER MOWER	4	i

Plate

LEVER FORWARD

9 TO RAISE MOWER

37406, 917.374061 specifications

The Craftsman 917.374061 and 917.37406 are part of the renowned Craftsman lawn tractor series, known for their durability, efficiency, and user-friendly design. These riding mowers are crafted to make lawn care less of a chore and more of an enjoyable experience, blending technology and performance to meet the needs of homeowners.

One of the standout features of the Craftsman 917.374061 and 917.37406 is their powerful engine. Equipped with a robust Briggs & Stratton engine, these tractors offer reliable starting and high-performance operation. The engine provides ample power to handle both flat and uneven terrains, making it suitable for various lawn sizes and configurations.

The cutting deck of these models measures 42 inches, allowing for a wide cutting path that minimizes mowing time. The mower deck is built from high-quality steel, ensuring durability while delivering a clean and precise cut. Additionally, the deck features a height adjustment mechanism that allows users to choose their desired cutting height easily, enabling effective grass management across seasons.

Comfort is another key aspect of the Craftsman 917.374061 and 917.37406. These tractors are designed with an ergonomic seat and easy-to-reach controls to enhance the user experience. The spacious foot area and dashboard provide added comfort, allowing operators to mow for extended periods without discomfort.

For convenience, these models come with a convenient automatic transmission system. The hydrostatic drive allows for smooth and effortless speed control, making it easy to navigate around obstacles and tight spaces in the yard. This technology enhances maneuverability, making mowing a less daunting task, even for those new to lawn care.

Moreover, both models support an array of attachment options, expanding their versatility beyond just mowing. Users can easily connect baggers, trailers, and snow blowers, making these tractors useful year-round.

In summary, the Craftsman 917.374061 and 917.37406 are excellent choices for anyone looking for reliable, efficient, and user-friendly lawn tractors. With their powerful engines, durable cutting decks, and focus on operator comfort, they stand out in the competitive lawn care market. Whether you're maintaining a small garden or a larger yard, these Craftsman models are designed to meet a variety of landscaping needs with ease and efficiency.

Craftsman 917.374061 owner manual HOW to USE Your Lawn Mower

Models: 37406 917.374061