Safety Instructions
The information listed below should be read and
understood by the operator. This information is given to
_rotect the userwhile operating and storingtheair
compressor. We utnize the symbols below to allow the
reader to recognize important information about their
safety.
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury
Indicates a potentially hazardous situation which, if not
avoided, mayresult inminor ormoderate injury.
When used without the safety alert symbol indicatesa
potentially hazardoussituation which,if not avoided, may
result in property damage.
Important Safety Instructions and Guidelines

•Save all instructions

Improper operation or maintenance of this product could result in serious injury and/or property damage. Read and
understand all of the warnings and safety instructions provided before using this equipment.

Risk of Moving Parts

Risk of Burns

N

Risk of Falling

Risk from

Flying Objects

The air compressor should be operated on a dedicated 15amp circuit. If the circuit does
not have 15 free amps available, a larger circuit must be used. Always use more air
hose before utilizing extension cords. All extension cords used must be 12 gauge with
a maximum length of 25 ft. The circuit fuse type must be a time delay. Low voltage could
cause damage to the motor.
If the air compressor is in operation, all guards and covers should be attached or
installed correctly. If any guard or cover has been damaged, do not operate the
equipment until the proper personnel has correctly repaired the equipment. The power
cord should be free of any moving parts, twisting and/or crimping while in use and while
in storage.
There are surfaces on your air compressor that while in operation and thereaftercan
cause serious burns if touched. The equipment should be allowed time to cool before
any maintenance is attempted. Items suchas the compressor pump and the outlettube
are normally hot during and after operation.
Operation of the air compressor should always be in a position that is stable. Never use
the air compressor on a rooftop or elevated positionthat could allow the unit to fall or
be tipped over. Use additional air hose for elevated jobs.
Always wear ANSI Z87.1 approved safety glasses with side shields when the air
compressor is in use. Turn off the air compressor and drain the air tank before
performing any type of maintenance or disassembly of the hoses or fittings. Never point
any nozzle or sprayer toward any part of the body or at other people or animals.