Parts & Features
See figuresbelow for reference.
Air Intake Filter
Providesclean air to the pump and must always be kept free of debris. Check on a daily basis or before each use.
IRegulator Gauge
Indicates the outgoing air pressure to the tool and is controlled
by the regulator.
Outlet Tube
Oil Fill Cap

J

Tank Pressure Gauge
Indicates the reserve air pressure in the tank.
Pressure Switch
Thiscontrolsthe power to the motor and also the
cut-in/cut-outpressuresettings. This switch serves
as theAuto-On/Off positionsfor the unit,
Pressure Relief Valve
The pressure relief valve located on the
sideof the pressure switch, is designed to
automaticallyrelease compressedair when
theair compressor reaches cut-out pressure.
The released air should only escape
momentarilyandthe valve should then close.
Oil Sight Gauge
Pressure
Relief Tube
Safety Valve 1
Used to allow excess tankpressure to
escapeinto the atmosphere. This valve
should onlyopen when the tank pressure
isabove the maximum rated pressure.
Re_,.gulator
Ine air pressure coming from the air tank is
controlled by the regulator. To increase the
pressure turn the knob clockwise and to
decrease the pressure turn the knob
counterclockwise.
Quick Connect 1Offersa quick release feature for attaching and removing the air hose.
Tank Drain Valve /
Used to drain condensation from the air tank, Located at bottom of tank.
I Check Valve 1When the pump is not in operation the valve closes to retain air pressure inside the tank. An internal component.