REVERSIBLE
See Figure 4.
This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the ddll held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked.
CENTERPOSITION (LOCK)
FORWARDREVERSE
KEYLESS CHUCK
See Figure 6.
Your new drillhas a keyless chuck. As the name implies, you can hand tighten or release ddll bits in the chuck jaws. Grasp and hold the collar of the chuck with one hand. Rotate the chuck body with your other hand. The arrows on the chuck indicate which direction to rotate the chuck body in order to LOCK (tighten) or UNLOCK (release) the ddll bit.
UNLOCK'
(RELEASE)
CHUCK
BODY
TRIGGER
SELECTOR
LOCK
CHUCKCOLLAR
Fig. 4
DRILLBIT (TIGHTEN)
ACAUTION: To prevent gear damage, always allow chuck to come to a complete stop before
changing the direction of rotation.
To stop, release switch tdgger and allow the chuck to come to a complete stop.
CHARGER
See Figure 5.
Your charger has a "key hole" hanging feature for convenient, space saving storage. Screws should be installed so that center distances are
BACKSIDE
OFCHARGER
Fig. 5
Fig. 6
A WARNING: Do not hold chuck body with one hand and use power of the drill to tighten chuck jaws on drill bits. Chuck body could slip in your hand or your hand could slip and come in contact with rotating drill bit. This could cause an accident resulting in serious personal injury.
9
