Fitting Insert Plate to Table Surface | Craftsman pmn instruction

Router Table for the Craftsman

H.Fitting Insert Plate to Table Surface

1.Identify the components required, see below.

Insert Plate Adjustable Bolts x 4

Insert Plate

Retaining Bolts

x 4

Nylock Nuts x 8

Nylock Nut

with

Nylon ring

facing up

Insert plate

adjustment bolt

Fig. G.1

2.Assemble the four Insert Plate Adjustment Bolts and the four Nylock Nuts to table as shown in fig. G1.

After a few turns some resistance will be felt as the screws are gripped by the Nylock Nuts. Screw just enough to leave a few threads protruding through the nut.

3.Place the Insert Plate into the large opening in the table. The position of the plate should be with the Threaded Hole to the front right of the Table Surface, see fig. G2.

4.While pressing down on the Insert plate, gradually adjust the Insert Plate Adjustable Bolts with a screwdriver until the Insert Plate is level with the Table Surface. A steel rule or T-square can be placed on the top of the Insert Plate to help this levelling process.

The Insert Plate must be be supported equally on all four Insert Plate Adjustment Bolts. When pressure is applied, the Insert Plate should be stable.

5.Insert the four Insert Plate Retaining Bolts and fit the four Nylock Nuts to secure the Insert Plate to the Table Surface, and tighten securely, see fig.

G.3.

Fig. G.2

Threaded hole for Lead-on Pin

Insert plate

retaining bolt

Nylock Nut with

Nylon ring facing down

Fig. G.3

I.Fitting Router to Insert Plate

1.Turn the table onto its side, invert the router and line up the Mounting Holes in the Insert Plate, as identified in section D, with the appropriate securing points in the base of the router.

2.Insert the correct Router Fixing Bolts, as identified in section D, through the Insert Plate and into router base. Fit appropriate washers and nuts if applicable, see fig. H.

Note

Some models of router will require removal of plastic base prior to fitting, see Section D and pages 6 and 7.

Fig. H

-10-

pmn specifications

The Craftsman PMN, or Portable Multi-Tool Navigator, represents a significant evolution in handheld tools, designed to meet the diverse needs of both DIY enthusiasts and professionals alike. This compact device integrates several functionalities, making it an all-in-one solution for a variety of projects, from simple repairs to complex constructions.

One of the standout features of the Craftsman PMN is its ergonomic design. Weighing in at just a few pounds, it offers a comfortable grip, allowing users to handle it for extended periods without experiencing fatigue. The integrated rubberized handle provides extra traction, which increases safety when operating the tool in challenging environments.

Technologically, the Craftsman PMN boasts an innovative power management system. This system cleverly optimizes the energy output based on the selected mode, whether it’s drilling, sanding, or cutting. Coupled with a brushless motor, this technology enhances battery life and reduces noise, allowing for quieter operation without sacrificing performance.

The versatility of the Craftsman PMN is another key characteristic. It features an interchangeable head system that can quickly switch between various attachments. From drill bits and saw blades to sanding discs, users have the flexibility to execute numerous tasks efficiently. The quick-release mechanism simplifies changing attachments, making the transition seamless even in the midst of a project.

Moreover, the Craftsman PMN comes equipped with a built-in LED work light. This feature illuminates dark or hard-to-reach areas, making it an ideal tool for work in poorly lit spaces, such as attics, basements, or outdoors after sunset. Users can enjoy increased visibility, which contributes to precision and safety during operations.

In terms of durability, the Craftsman PMN is constructed with high-quality materials designed to withstand the rigors of professional use. Resistant to dust and moisture, this tool can perform reliably across various environmental conditions, making it a robust option for construction sites or home improvement tasks.

Ultimately, the Craftsman PMN embodies the evolution of multi-tool technology, offering an array of features that cater to the modern user's demands. Combining ergonomic design, advanced technology, versatility, effective lighting, and robust construction, it has established itself as a go-to investment for anyone looking to enhance their toolkit.

Craftsman pmn Fitting Insert Plate to Table Surface, Fitting Router to Insert Plate

Models: pmn