PROBLEM

PROBABLE CAUSE

REMEDY SUGGESTED

 

Excessive noise.

Motor fails to devet-

1. Motor

 

1. Have motorchecked

by qualified

service technician. Repair

 

 

service is avaiable at your nearest Sears store.

" ,

l

....

" "

'

op full power.

NOTE: LOW VOL-

TAGE: (Power out-

put of motor de- creases rapidly with

decrease in voltage at motor terminals.

For example, a reduction of 10% in

voltage causes a reduction of 19% in

maximum power output of which the motor is capable and a reduction of

20% in voltage causes a reduction

of 36% in maximum power output,)

Motor starts slowly or fails to come up to ful! speed.

1.Circuit overloaded with

lights, appliances and other motors.

2.Undersize extension cord or extension cord too

long.

i3. General overloading of Power company facilities.

1.Low voltage.

2.Windings burned out or open.

3, Starting switch will not operate. (Switch contacts working properly.) Capacitor is bad.

1.Do not use other appliances or motors on same circuit when using the Dust Collection System.

2.Increase the wire sizes on extension cords, or reduce length of extension cords, See "Motor Specifications and Electrical Requirements" section.

3.Request a power check from the power company.

1.Request voltage check from the power company.

2.Have motor repaired or replaced by a qualified service. technician.

3.Have capacitor replaced by a qualified service technician.

Motor overheats

Motor stalls (resulting in blown fuses or tripped circuit breakers).

1.Motor overloaded.

2.Improper cooling. (Air circulation restricted

through motor due to sawdust, accumulating inside of motor.)

1, Voltage too low to permit motor to reach operating speed.

2.Fuses or circuit breakers do not have sufficient capacity.

1.Clean out sawdust to provide no rrnaJ air circulation through motor. See "Maintenance" section.

1.Request voltage check from the power company.

2.Install proper size fuses or circuit breakers.

Frequent opening of

1.

Motor

overloaded.

fuses or circuit

2.

Fuses

or circuit breakers

breakers,

 

do not have sufficient

 

 

capacity.

1,Install proper size fuses or circuit breakers.

NOTE: Motors used on wood-working tools are particularty susceptible to the accurr_tation of saw- dust and wood chips and should be blown out or "vacuumed" frequently to prevent interference with normal motor ventilation and proper operation of the centrifugally-operated st;_rting switch.

........17

Page 17
Image 17
Craftsman SP5373 By qualified Service technician. Repair, Windings burned out or open, Motor overheats, Motor overloaded

SP5373 specifications

The Craftsman SP5373 is a powerful and versatile tool designed for both professional and DIY enthusiasts. This model stands out in the marketplace with a combination of cutting-edge technology, durability, and user-friendly features, making it a reliable choice for various applications in home improvement and meticulous craftsmanship.

One of the key features of the Craftsman SP5373 is its robust motor. With a substantial wattage, this tool provides the necessary power to tackle different tasks, whether it’s cutting, sanding, or drilling. This efficiency not only enhances productivity but also ensures that users can handle tougher materials without straining the equipment.

The design of the SP5373 emphasizes ergonomics. Its handle is crafted for comfort, allowing for extended use without causing fatigue. The grip is non-slip, providing excellent control even in challenging conditions. This allows users to execute precise cuts and finishes, contributing to superior quality workmanship.

In terms of versatility, the Craftsman SP5373 comes with a range of accessories that cater to different projects. From blades to bits and sanding pads, the tool is equipped to handle a variety of tasks. This adaptability means that users can seamlessly switch between applications without the need for multiple tools, saving both time and space in their workshop.

The technology integrated into the SP5373 also includes an advanced safety mechanism, ensuring that the tool operates smoothly without risk of malfunction. This feature not only protects the user but also enhances the longevity of the machine. Craftsman’s commitment to safety extends throughout their product line, and the SP5373 is no exception.

Additionally, the tool is built with premium materials that ensure durability. It can withstand the rigors of heavy use in demanding environments, making it suitable not only for home projects but also for professional workshops. The sturdy construction means that users can expect reliable performance over time.

In conclusion, the Craftsman SP5373 is a standout tool that blends power, comfort, and advanced technology. Its range of features, including a strong motor, ergonomic design, safety mechanisms, and versatility with accessories, makes it an invaluable asset for anyone serious about craftsmanship. Whether used for simple home repairs or complex projects, the SP5373 delivers consistent results that meet the high standards of both professionals and hobbyists alike. A worthwhile investment for those looking to enhance their toolkit, the Craftsman SP5373 is a testament to quality engineering and practical design.