Craftsman SP5373 Extension Cords, Electrical SHOCK, Particu Larly When Used in Damp Locations

......................' .............. " " ".... " 4 _1 , , _ __

TION: CONNECT TO _A::120Vi 15"AMP, BRANCH CIRCUIT AND USEA15=AMP,TIME DELAY FUSE OR

CIRCUIT BREAKER; FAILURE TO CONNECT IN

THIS WAY CAN RESULT IN INJURY FROI_I SHOCK

OR FIRE,

Your Dust Collection System must be properly grounded: Not all outlets are properly grounded, tf you are not sure that your outlet is propedy grounded. have it checked by a qualified electrician

_ WARNtNG: IF NOT PROPERLY GROUNDED,

THiS DUST COLLECTION SYSTEM CAN CAUSE

ELECTRICAL SHOCK, PARTICU LARLY WHEN USED IN DAMP LOCATIONS;

,_.: WARNING:. L TO AVOID SHOCK OR FIRE, I!F

POWER CORD iS WORN, CUT, OR DAMAGED IN ANY WAY, HAVE IT REPLACED IMMEOATELY.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug illustrat- ted below. Atemporary adapter may be used to connect this plug to a 2-pole receptacle, as shown below, if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrican. The green colored rigid ear, lug, or the like, extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. When- ever the adapter is used. it must be held in place by a metal screw.

WARNllNG: IMPROPERCONNECTION

OF THE EQUIPMENT GROUNDING CONDUCTOR CAN RESULT IN A RISK OF ELECTRIC SHOCK. CHECK WITH A QUALiFiED ELECTR]CAN OR SERV-

ICE PERSON IF YOU ARE IN DOUBT AS TO WHETHER TH E OUTLET IS PROPERLY GROU NDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE APPLICANCE IF IT WILL NOT FIT THE OUTLET,

HAVE A PROPER OUTLET INSTALLED BY A QUALF FlED ELECTRICIAN.

_I_-'j:_I 3-PR0NG PLUG

GROUNDING iNSTRUCTIONS

This appliance must be grounded, tf it should malfunc- tion or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment:grounding Conductor and ground: ing plug. The plug must be plugged into an appropriate

outlet that is properly installed and grounded in accor- dance with all local codes and ordinances.

_WARNING: TO MAINTAIN PROPER DUST

COLLECTION SYSTEM GROUNDING, WHENEVER THE OUTLET YOU ARE PLANNING TO USE FOR THIS POWER TOOL IS OFTHE TWO PRONG TYPE, DO NOT REMOVE OR ALTER THE GROUNDING

PRONG IN ANY MANNER.

I t _ (J_ "_ GROUNDING PRONG

' _	_	PROPERLY
1 _1-	ii _"GR0UNDED
It	_	OUTLET
		GROUNDING		LUG
			i:_;'_ji i MAKE SURE THtS IS
	3-PRONG	PLUG :f"	L _-"	,. -	CONNECTED TO A
		':;';	[ _ .i-:"-t ,i		KNOWN GROUND
		-\-.;I	, .	_	2-PRONG
	'-	_		:"	RECEPTACLE

ADAPTER

_ WARNING: THE ADAPTER ILLUSTRATED IS

FOR USE ONLY IF YOU ALREADY HAVE A PROP- ERLY GROUNDED 2-PRONGRECEPTACLE,

EXTENSION CORDS

The useof any extension cord wilt cause some loss o! power. Use:the following: table to determine the mini- mum wire size (A_W,G.} extension cord. Use only 3-wire extension cords which have 3-prong groL_nding type accept the tool's

For

t i i :1"1 j:" - -'" i¸:

box. the wire size must be _ncreased proportionately in order to deliver ample voltage to the sawdust collec-

tion system	motor.	Wire Sizes	Required
Length	of	(American	Wire Gage
Conductor		3_20Y Lines
0 - 25 feet		No. 16
26 - 50 feet		No. 14
51 - 100 feet		No. 12

i,,

14