You can select one or more tracks to be loaded.

One

Each selected track is individually loaded to a

 

new program automatically created on the

 

current drive.

 

 

 

You can select one or more tracks to be loaded.

Select

All the selected tracks are individually loaded to

 

a new program automatically created on the

 

current drive.

 

 

 

All the tracks on an audio CD are loaded to a

All

new program automatically created on the

 

current drive.

 

 

*“A new program automatically created on the current drive” has the program number one higher than the current highest program number.

7.Select the desired load type and press the [ENTER/YES] key.

Depending on the selected load type, the display shows as below.

When selecting “One” or “Select”:

The screen as shown below appears.

The left column shows the track numbers (01, 02...) of the audio CD, while “NON” in the second column shows no program is selected.

” is shown when more than one track is recorded on the audio CD. It is not shown when only one track is recorded on the audio CD. If only one track is recorded on the audio CD, “” is not shown. To select desired tracks to be loaded, go to step 8.

• When selecting “All”:

All tracks on the audio CD are selected to be loaded, and the screen as shown below appears. In this screen example, the destination program newly created on the current drive is “P05”. Each track time is also shown.

<Note>

When loading from a audio CD, no title is shown when selecting the track.

When selecting “All”, you can start loading tracks to the current drive by pressing the [ENTER/YES] key while holding down the [RECORD] key.

You can delete an unnecessary track if you want. See <Hint> below about how to do it.

<Hint>

Before executing “All” track loading, you can delete an unnecessary track by the following procedure.

1)While the display shows the screen as above, use the [JOG] dial to highlight the desired track and press the [ENTER/YES] key.

The destination program number of the selected track starts flashing.

2)Use the [JOG] dial to select “NON” and press the [ENTER/ YES] key.

A track whose destination program number is set to “NON” is not loaded.

8.Use the [JOG] dial to select (highlight) a desired track to be loaded and press the [ENTER/YES] key.

The load destination program number of the selected track is shown as a flashing display, as well as the track time. In the screen example below, track 1 (01) is selected. The total time is also shown above the track list. (The total time is summed up each time you select another track.)

In this condition, you can choose the option between “Pxx” (program number) and “NON” using the [JOG] dial. To cancel the track selection, choose “NON” and press the [ENTER/YES] key. To set the track to be loaded, go to the next step.

9.Press the [ENTER/YES] key.

The selected track (“01”, in this example) is set, while the screen changes as below.

10.Use the [JOG] dial to select (highlight) another desired track to be loaded and press the [ENTER/YES] key.

In the example below, track 2 (02) is selected (of course, you can select whichever track you want). Depending on the load type (“One” or “Select”) selected in step 7) above, the screen shown is slightly different.

When you set the load type to “One”, the load destination program number for the secondly selected track is one higher than that for the firstly selected track. That is, the load destination program number is counted up each time you select a track.

130

Page 130
Image 130
Fostex VF160EX operation manual 130, Select the desired load type and press the ENTER/YES key, When selecting One or Select