32. [AUTO RTN-START/MARK1] Key

AUTO

 

AUTO

PLAY

 

RETURN

* This key is used to CHECK/CHANGE the parameters

saved at the start point (AUTO RETURN START POINT)

when executing auto return or auto repeat.

OFF

AUTO

*

Press this key while the [SHIFT] key is depressed to

 

CHECK/CHANGE the parameters saved in [MARK1].

*

This can be used as Locate Memory.

33. [AUTO PUNCH-IN/MARK2] Key

*This key is used to CHECK/CHANGE the parameters saved at the recording start point (PUNCH IN POINT) when executing auto punch in/out, paste or erase.

*Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK2].

*This can be used as Locate Memory.

34. [AUTO PUNCH-OUT/MARK3] Key

*This key is used to CHECK/CHANGE the parameters saved at the recording end point (PUNCH OUT POINT) when executing auto punch in/out or erase.

*Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK3].

*This can be used as Locate Memory.

35. [AUTO RTN-END/MARK4] Key

*This key is used to CHECK/CHANGE the parameters saved at the end point (AUTO RETURN END POINT) when executing auto return or auto repeat.

*Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK4].

*This can be used as Locate Memory.

36. [CLIPBOARD-IN/MARK5] Key

*This key is used to CHECK/CHANGE the parameter saved at the start point (CLIPBOARD IN POINT) when copying from or pasting to the clipboard.

*Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK5].

*This can be used as Locate Memory.

37. [CLIPBOARD-ALIGN SEL/MARK6] Key

*This key is used to CHECK/CHANGE the parameter saved at the align point (ALIGN POINT) when copying/pasting or moving/pasting.

*Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK6].

*This can be used as Locate Memory.

38. [CLIPBOARD-OUT/MARK7] Key

*This key is used to CHECK/CHANGE the parameter saved at the end point (CLIPBOARD OUT POINT) when copying from or pasting to the clipboard.

*Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the parameters saved in [MARK7].

*This can be used as Locate Memory.

39. [A RTN/A PLAY/SCENE SEQ.] Key

*Every time this key is pressed the mode switches from Auto Play -> Auto Return -> Auto Repeat -> OFF, and this mode is shown on the LCD.

REPEAT

*Press this key while the [SHIFT] key is depressed to turn ON/OFF the scene sequence.

When scene sequence is switched β€œon”, the normal display section β€œS**” will change to reversed black and white display.

40. [HOLD/>] Key

*This key is used to hold the parameter (time or BAR/ BEAT/CLK) when the key is pressed. The parameter is simultaneously displayed and is editable.

*When this key is pressed at editing of the value, the digit can be moved to the right or below, and if this key is pressed while pressing on the [SHIFT] key, it can be moved to the left or above.

41. [STORE] Key

*This key is used to store the edited parameters (time or BAR/BEAT/CLK) to the editing point (AUTO PUNCH POINT, etc.), MARK point, LOCATE MEMORY, etc.

42. [EDIT] Key

*This key is used to copy, past and edit the sound. The following 5 types of sound editing types are possible.

a.[Copy Clip]

b.[Move Clip]

c.[Copy Paste] or [Move Paste]

d.[Erase]

e.[Track Exchange]

43. [UNDO/REDO] Key

*This key is used to copy, past and edit sound as well as cancel and undo the auto punch in/out, recording and other processes.

*Press this key again to return to the state prior to undo (redo).

44. [VARI PITCH/P.EDIT] Key

*Every time this key is pressed the mode alternates between VARI PITCH (PLAY/REC at different speed) ON (Key: Light ON)/OFF (Key: Light OFF).

*Press this key while the [SHIFT] key is depressed to alter the speed variation (Pitch Edit).

45. [LOCATE/EVT MEM] Key

*This key is used to locate the editing point (AUTO PUNCH POINT, etc.) and Mark Point.

*The last located parameter is saved as the parameter of this key, every time. Therefore, it is possible to simply press this key to go to the last located point (LAST LOCATE).

*Press this key while the [SHIFT] key is depressed to edit the parameter saved in Event Memory (Event number 01-99).

20

Page 20
Image 20
Fostex VF160EX Auto RTN-START/MARK1 Key, Auto PUNCH-IN/MARK2 Key, Auto PUNCH-OUT/MARK3 Key, Auto RTN-END/MARK4 Key