3.Press the [REWIND] key or [F FWD] key to move the cursor to the point to edit. Then turn the [JOG] dial to choose the alphanumeric/symbol to input.

The title can contain up to 16 characters form the following alphanumerics and symbols.

4.Press the [ENTER/YES] key after inputting the title.

The title input is set and the LCD returns to the Normal Display.

Editing theTrack

The VF160EX features a 3.5 inch E-IDE hard disk as a storage media. This allows speedy voice editing in a nonlinear and nondestructive manner in track units. There are four track editing options as described below.

Copy & Paste

A specific range of data on a voluntary track can be copied and then pasted to the same track or another track. Note that the Copy & Paste feature is only possible with the current program started.

Move & Paste

A specific range of data of a voluntary track can be moved and pasted to the same track or another track. Note that the Move & Paste feature is only possible with the current program started.

Erase

A specific range of data on a voluntary track or on all real tracks are erased. Note that the Erase feature is only possible with the current program started.

Track Exchange

Tracks are interchangeable with each other.

Mono tracks or several (2 track or 8 track unit) tracks are exchangeable, to freely exchange between the 24 real tracks and additional tracks. Note that the Track Exchange feature is only possible with the current program started.

<Precautions>

DO NOT change the program during the editing process until the entire editing process is completed, since the editing process only effects the program currently selected.

Note that the editing process other than Track Exchange is only an option for real tracks (Trk 1-16). To edit data on additional tracks (Trk 17-24), exchange it to a real track to execute the editing process.

Copy & Paste and Move & Paste

Copy & Paste

Copy & Paste refers to the procedure to temporarily copy to a clipboard (Copy/Clip) a specific range of data on a voluntary track. That copied data can then be pasted to a specific paste point on a voluntary track. Since, the data copied remains in the clipboard even after pasting the data, that same copied data can be pasted numerous times.

 

 

CLIPBOARD IN POINT

 

 

CLIPBOARD OUT POINT

COPY

 

 

 

 

 

SOURCE

 

 

 

 

 

 

 

TRACK

 

 

 

 

 

 

 

 

 

 

 

COPY CLIP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO PUNCH IN POINT

 

 

PASTE

 

 

 

 

 

 

PASTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DESTINATION

 

 

 

 

 

TRACK

 

 

 

 

 

 

 

Move & Paste

Move & Paste resembles the Copy & Paste feature and refers to the procedure to temporarily move to a clipboard (Move/Clip) a specific range of data on a voluntary track. The difference between the Move & Paste and Copy & Paste feature is that with Move & Paste the original data moved can only be pasted ONCE. At the point the move data is pasted the data in the clipboard and original data is no longer available to paste again.

 

 

CLIPBOARD IN POINT

 

 

CLIPBOARD OUT POINT

MOVE

 

 

 

 

 

 

 

SOURCE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TRACK

 

 

 

 

MOVE CLIP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO PUNCH IN POINT

 

 

PASTE

 

 

 

 

 

 

PASTE

 

 

 

 

 

 

 

 

DESTINATION

 

 

 

 

 

TRACK

 

 

 

 

 

 

 

72

Page 72
Image 72
Fostex VF160EX Editing theTrack, Copy & Paste and Move & Paste, Press the ENTER/YES key after inputting the title