Fostex VF160EX operation manual 124, After selecting the desired tracks, press the ENTER/YES key

6.After selecting the desired track(s), press the [ENTER/YES] key.

The display shows the screen for selecting the load destination program to which a WAV file is loaded. You can select the program by using the [JOG] dial.

Flashing

When the screen shows "Title" and "size", the selected program will be deleted and replaced with the WAV file loaded.

When the screen shows "Title" and "New PGM", the WAV file loaded will create a new program.

<Note>

If the current drive does not have enough available space for loading the WAV file, the size indication on the screen shows a negative value ("-***").

In such a case, select a program that can be replaced with the WAV file loaded without causing the disc space shortage, or delete unnecessary programs by the "delete PGM" menu in the Setup mode.

7.After selecting the load destination program, press the [ENTER/YES] key.

When selecting a new program as the load destination (by selecting an option showing "Title" and "New PGM"), the load operation immediately starts.

When selecting an existing program as the load destination (by selecting an option showing "Title" and "Size"),

"Overwrite?" and "Sure?" appear.

Pressing the [ENTER/YES] key will start the load operation. During the load operation, the screen shows something like the one as below.

As the data load goes on, the remaining data size shown on the screen counts down.

When the load operation is completed, "Load Completed!" appears on the screen.

<Note>

The title of the program to which the WAV file is loaded is replaced with the WAV file name loaded (the first 6 characters).

8.Press the [EXIT/NO] key (or the [STOP] key) repeatedly until exiting the Setup mode.

To go back to the previous step or about the operation, you can also use the [EXIT/NO] key or the [STOP] key.

124