Fostex VF160EX 119, About load error, While New PGM is shown, press the ENTER/YES key

7.While “New PGM” is shown, press the [ENTER/YES] key.

The VF160EX starts the load operation. The recorded space shown on the display is counted down while the load operation progresses.

It will take some time for loading all data. The following display example shows that the data of the backup number “B01” is being loaded to “P08” which is newly created on the current drive.

<Display example for loading>

<Note>

If there is not enough available space for loading on the current drive, the display shows “Disk Full!” and the display returns to the previous screen.

When completing the load operation, “Load Completed!” appears on the display (as shown below) and the VF160EX stops access to the drive, while the disc in the CD-R/RW drive is automatically ejected.

When loading data from more than one disc, the first disc will be ejected immediately after all disc data has been loaded, while “Insert Disk!” appears on the screen. After inserting the second disc, the VF160EX automati- cally resumes the load operation.

After completing loading all the discs, the above screen appears.

<Note>

You cannot abort the load operation before completed.

8.Press the [EXIT/NO] key (or the [STOP] key) to exit the Setup mode.

<About load error>

If an error occur for some reason during the load operation, the error message as below appears.

If it appears, press the [EXIT/NO] key.

The display returns to the previous screen before per- forming the load operation.

Note that loaded data before the error message ap- pears is all invalid.

119