Fostex VF160EX operation manual Effect Send Level Adjustment, Modifying Effect Type

EQ curve

5.To adjust other items or another frequency range of the equalizer, press again the [HI-G/F/Q] key, [MID-G/F/Q] key or [LO-G] key. Then turn the [JOG] dial to modify the parameter.

6.To adjust other channel, press the [CH STATUS/CH SEL] key of that channel.

7.When adjustments are completed,press the [EXIT/NO] key.

The system returns to the Normal Display.

Effect Send Level Adjustment

Tips:

For fader-paired channels (set by the “Pair fader setting” menu in the Setup mode) controlling the level for one chan- nel affects both channels simultaneously.

See page 146 for details about how to pair faders.

1.Press the [CH PARAM EDIT-EFF1/EFF2] key.

Every time the key is pressed the mode alternates between the EFF1 and EFF2 menu.

flashing

4.To adjust other channels, press the [CH STATUS/CH SEL] key of that channel.

5.When adjustments are completed, press the [EXIT/NO] key.

The system returns to the Normal Display.

Modifying Effect Type

1-1. Press the [EFF EDIT-EFF1] key.

The effect 1 selection menu appears along with the currently set effect type.

flashing

Example: Display when the [EFF EDIT-EFF1] key is pressed.

1-2. Press the [EFF EDIT-EFF2] key.

The effect 2 selection menu appears along with the currently set effect type.

flashing

Example: Display when the [EFF EDIT-EFF2] key is pressed.

2.Turn the [JOG] dial to select the effect type.

3.Press the [ENTER/YES] key.

The mode switches to the effect selected.

It is possible to adjust the parameters of the effect in this state.

2.Press the [CH STATUS/CH SEL] key of the channel intended to adjust the effect send level.

The channel name and current setting of the channel selected appears on the LCD. Press the [MASTER CH STATUS/CH SEL] key to adjust the master send level.

flashing

flashing

3. Turn the [JOG] dial to set the effect send level.

The parameter settings alternate every time the [EFF EDIT- EFF1] key or [EFF EDIT-EFF2]key is pressed.

Turn the [JOG] dial to modify the parameters.

Only the effect type is modified here. For more details refer to a later section.

4.When adjustments are completed, press the [EXIT/NO] key several times.

The system returns to the Normal Display.

41