Fostex VF160EX operation manual Selecting the effect type, When the EFF 2 key is pressed

Effect types preset for EFF 2

	Name	Parameter type	Explanation
L01
~	1~28 are the same effect types as the EFF 1 presets listed on the preceding page. (For details refer to the preceding page.)
L28
L29	MonoDELAY	DELAY	Mono delay
L30	PanDELAY	DELAY	Panning delay
L31	MonoBpmDL	BPM DELAY	Mono delay. Specify BPM and note value to set the delay time.
L32	PanBpmDL	BPM DELAY	Panning delay. Specify BPM and note value to set the delay time.
L33	Short DL	SHORT DELAY	Short delay that allows you to set the delay time precisely.
L34	DOUBLING	DOUBLING	Doubling that allows you to set separate delay times for L and R.
L35	CHORUS	CHORUS	Produces a chorus effect. A doubling effect can also be added.
L36	FLANGE	FLANGE	Produces a flanging effect.
L37	MonoPITCH	MONO PITCH	Pitch shift adjustable in a +/-2 octave range.
L38	DlyPITCH	DELAY PITCH	Pitch shift with a feedback delay, allowing strange effects to be produced.

< Note: Changing the effect preset may mute the sound momentarily! >

Effect presets of the internal effect processor shown above are classified into three types; ambience/ delay type (No.1 through 28), modulation/pitch type (No.29 through 36) and pitch type (No.37 and 38). If you switch the effect preset between the three types above, the audio is momentarily muted.

Selecting the effect type

Here's how to select the effect type for EFF 1 or EFF 2.

EFF EDIT

EFF1EFF2

When the [EFF 2] key is pressed:

With the initial settings, “L35: CHORUS” will appear.

MUTE

MUTE

Press this to set the effect type for EFF 1.

Press this to set the effect type for EFF 2.

*As described earlier in "Basic Recording and Play back," raise the CHANNEL fader of a channel to which a signal is being input and raise the MASTER fader, so that the sound is heard at an appropriate level.

*As described earlier in "Setting the effect send level," raise the EFF 1 SEND level or the EFF 2 SEND level for the channel(s) to which you wish to apply the effect.

1.If you wish to set EFF 1, press the EFF EDIT mode [EFF 1] key. To set EFF 2, press the [EFF 2] key.

With the initial settings, the following displays will appear.

When the [EFF 1] key is pressed:

With the initial settings, “L01: Norm HALL” will appear.

2.Use the [JOG] dial to select the effect type.

The effect types listed in the foregoing tables will appear in succession. When an effect type appears, it will be blinking. The blinking indicates that the effect type has not yet been selected.

3.Press the [ENTER/YES] key.

The effect type will be finalized, and the parameter setting screen will appear.

The default (initial) parameter values will be displayed.

Flashing

Details on the parameters are given in the following section, "Parameter settings."

4.To exit Effect Edit mode, press the [EXIT/NO] key twice in succession.

You will return to Normal display.

58