Fostex VF160EX operation manual 121, About the Clipboard Export function

Saving a WAV file

The following description is assumed that an unused CD-RW/CD-R disc is set to the CD-R/RW drive.

1.Press the [SETUP] key to enter the Setup mode.

The display shows the screen for selecting the Setup menu.

2.Use the [JOG] dial to select "Save PGM" and press the [ENTER/YES] key.

The display shows the screen for selecting the device to which the data is saved. "IDE" flashes.

Flashing

3.While "IDE" is flashing, press the [ENTER/YES] key.

The display shows the screen for selecting the save mode, where "BkUp" flashes.

<About the Clipboard Export function>

The "Clipboard Export function" allows you to save the desired range of data between the Clipboard In and Out points which are set when executing the Copy-paste or Move-paste function.

Therefore, if you want to save only the specific range of data, you have to register the Clipboard In and Out points before the save operation.

See "Locate Function" in "Chapter 2 Basic Recording and Playback" for details about how to set the Clip- board In and Out points

<Note>

If you save all data from "ABS 0" to "REC END", make

sure to set the "Clipboard Export function" to "Off".

6.While "Off" is flashing, press the [ENTER/YES] key.

The display shows the screen for selecting a program to be saved. The program number currently selected flashes, while the data size of the program is shown.

Flashing

Flashing

4.While "BkUp" is flashing, press the [ENTER/YES] key.

The display shows the screen for selecting the backup mode (FDMS3 or WAV), where "WAV" flashes.

Flashing

7.Use the [JOG] dial to select a program to be saved and press the [ENTER/YES] key.

The display shows the screen for selecting a track to be saved. Initially, "All Track" flashes.

Flashing

5.While "WAV" is flashing, press the [ENTER/YES] key.

The display shows the screen for selecting On or Off of the Clipboard Export function, where "Off" flashes.

You can switches between On and Off by using the [JOG] dial (or [REWIND] key/[F FWD] key).

Flashing

If you save all data from "ABS 0" to "REC END" (in most cases), you do not have to change the setting here.

By rotating the [JOG] dial (or press the [F FWD] key), you can select "From ** To **" (where the left field flashes initially) instead of "All Track".

If you save data for all tracks (1 through 24), select "All Track".

If you save data for any specific track (s), select "From ** To **" and specify the desired track numbers.

Flashing

121