15. [EFF EDIT-EFF1/MUTE] Key

*This is used to CHECK/CHANGE the EFFECT type and parameter settings of EFFECT 1.

*Press this key while the [SHIFT] key is depressed to turn ON/OFF the mute feature of EFFECT 1.

16. [EFF EDIT-EFF2/MUTE] Key

*This is used to CHECK/CHANGE the effect type and parameter settings of EFFECT 2.

*Press this key while the [SHIFT] key is depressed to turn ON/OFF the mute feature of EFFECT 2.

17. [CH PARAM EDIT-EFF1/EFF2/PRE/POST] Key

*This is used to CHECK/CHANGE the send level settings of EFFECT 1 or EFFECT2. The EFFECT 1 and EFFECT 2 settings alternate every time the key is pressed.

*Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the PRE/POST settings of EFFECT1 or EFFECT 2.

*Use the [CH STATUS/CH SEL] Key to select the channel to change any settings together.

18. [CH PARAM EDIT-EQ/COMP-HI/G/F/Q/COMP] Key

*This is used to CHECK/CHANGE the high frequency parametric equalizer settings. The parameter settings alternate every time the key is pressed.

*Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the COMPRESSOR settings.

*Use the [CH STATUS/CH SEL] Key to select the channel to CHECK/CHANGE any settings together.

19. [CH PARAM EDIT-AUX1/AUX2/PRE/POST] Key

*This is used to CHECK/CHANGE the send level settings of AUX 1 or AUX 2. The AUX 1 and AUX 2 settings alternate every time the key is pressed.

*Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the PRE/POST settings of AUX 1 or AUX 2.

*Use the [CH STATUS/CH SEL] Key to select the channel to change any settings together.

20. [CH PARAM EDIT-EQ/COMP-MID-G/F/Q] Key

*This is used to CHECK/CHANGE the midrange frequencies of the parametric equalizer settings.

*Press this key while the [SHIFT] key is depressed to CHECK/CHANGE the settings.

21. [CH PARAM EDIT-PAN/FADER] Key

*This is used to CHECK/CHANGE the PAN settings.

*Press this key while the [SHIFT] key is depressed to show the current fader location. Finer level adjustment is possible by using the [JOG] dial.

*Use the [CH STATUS/CH SEL] key to select the channel to change any settings together.

22. [CH PARAM EDIT-EQ/COMP-LO-G/CH VIEW] Key

*This is used to CHECK/CHANGE the low frequencies of the parametric equalizer settings.

*Press this key while the [SHIFT] key is depressed to show the settings of the selected channel.

*Use the [CH STATUS/CH SEL] key to select the channel to change any settings together.

23. [MASTER CH STATUS/CH SEL] Key

*This becomes the master channel ON/OFF key when the LCD is in the normal display mode (described later).

*Select the channel to CHECK/CHANGE any settings with the ([CH PARAM EDIT] Key (No. 17-22)] to CHECK/CHANGE any PAN, equalizer or other mixer settings.

*The STATUS of the key lights ON are defined below.

[GREEN]: The level of the stereo buss L, R outputs are adjustable with the fader.

[OFF]: The signals to the master fader are [MUTE] (no sound).

24. [MASTER] Fader

*This is used to adjust the master level of the sound signals output from the STEREO OUT L, R jacks.

For more details, refer to the respective instructions of each item.

18

Page 18
Image 18
Fostex VF160EX EFF EDIT-EFF1/MUTE Key, EFF EDIT-EFF2/MUTE Key, CH Param EDIT-EFF1/EFF2/PRE/POST Key, Master Fader