Fostex VF160EX operation manual Making the chain play list by selecting all the programs, Pnn

Making the chain play list

Before executing chain play, you must make the chain play list by selecting the desired (or all) programs in the desired order. You can enter up to 99 programs to the chain play list.

On pages 98 and 99, two procedure examples for entering programs on the VF160EX current drive to the list are shown. The former example shows how to enter all programs on the current drive, while the latter shows how to enter desired programs. Both examples assume that 10 programs exist on the current drive.

1.While the VF160EX is stopped, press the [SETUP] key.

The VF160EX enters the setup mode and the display changes to show the “Select Menu” screen for selecting a setup menu item. By default, the “Signature Set” flashes as shown in the figure below.

2.Use the [JOG] dial to select “Chain Play List” which is the 23rd menu item (R23) in the setup menu, and then press the [ENTER/YES] key.

The display changes to show the “Chain Play List” screen, in which “C01:END” is highlighted by default. “C01” shows the step number, while “END” shows no program is entered to the chain play list.

3.Press the [ENTER/YES] key again.

“END” starts flashing and you can now enter a desired program to step 01.

By rotating the [JOG] dial while “END” is flashing, you can select a desired option from among the programs on the drive (“P01” through “P10”), as well as “ALL”, “INS” and “DEL”. See the table below for details about each option.

END	The current and succeeding steps in the chain play
	list are all deleted. (See “Deleting all programs from
	the chain play list” described later for details.)
	All programs on the current drive are entered to the
ALL	chain play list. Note that you can select “ALL” to step
	1 (C01) only. There is no “ALL” option on other steps.
	(See “Making the chain play list by selecting all the
	programs” described later for details.)
	A desired program can be added (inserted) to the
INS current step. (See “Inserting a program to the chain
	play list” described later for details.)
	The program on the current step is deleted. (See
DEL	“Deleting a program from the chain play list”
	described later for details.)
	A desired program is entered to the current step. If
P01 another program is already entered, the new

~program overwrites it. You can select any of the

Pnn	programs on the current drive. (See “Making the
	chain play list by selecting desired programs”
	described later for details.)

Making the chain play list by selecting all the programs

The following procedure example shows how to enter all the programs (P01 through P10) on the current drive to the chain play list.

1.While “END” is flashing, rotate the [JOG] dial to select “ALL”, and press the [ENTER/YES] key.

By rotating the [JOG] dial to the left, you can find “ALL” easily.

By pressing the [ENTER/YES] key after selecting “ALL”, all programs on the current drive are entered to the chain play list, as shown in the screen example below.

By rotating the [JOG] dial, you can scroll through the list to check the chain play list. In the last line on the list, “C11: END” is shown, which shows that no more program is entered after step 11.

97