Fostex VF160EX Having trouble Editing?, 150, Correctly register the Clipboard in and OUT points

•Even though effect is selected for the sourc channel, effect cannot be applied ?

Raise the effect send level.

Initially, the effect send level of each channel will all be at "0".

Select the channel for applying effect and raise the ef- fect send level with the [JOG] dial. For details, read page 52.

• Ping pong recording cannot be executed ?

Is the playback track for ping pong set to source channel.

Press the [BUSS-SOURCE]key and set the track for ping pong to source channel.

Then, press the [BUSS-RECTRK]key and set the ping pong objective track in the READY mode.

In the example below, tracks 1-4 and 9-12 are selected for the source channel and their signals sent for ping pong into tracks 15 and 16.

• Cannot record external digital signals ?

Match "Digital In" in the SETUP mode to the digital signal (S/P DIF or adat) to be input.

Read page 141 for details.

• Cannot record analog signals ?

Could the track about to be recorded still be set for digital inputs.

Analog signals cannot be recorded in a track set for digital input by "Digital In" in the SETUP mode.

Reset the digital input to "Analog."

•At playback of digital signals just recorded, sound pitch is not normal ?

Record digital signals of sampling frequency iden- tical to that of the VF160EX.

The VF160EX sampling frequency is 44.1kHz/16 bit. In a sampling frequency other than 44.1kHz/16 bit, it will be recorded with the wrong pitch. Time count will also be incorrect.

Having trouble Editing?

•A warning message appears although it was only execution of copy-clip (or move-clip) ?

Correctly register the CLIPBOARD IN and OUT points.

The relation between CLIPBOARD IN point and OUT point is "IN point<OUT point".

If it is registered in reverse relationship, copy-clip (or move-clip) cannot be executed.

•When copy paste (or move paste) is executed,the sound section located before head of the bar is missing?

Use the ALIGN SEL function.

If the "ALIGN SEL" function is used at executing copy paste (or move paste), the sound section located in front of the bar head can be included at pasting.

Refer to page 74 for details.

150