• Exchange in 8-track units

1.While "01-08" on the left is flashing, press the [HOLD/>] or [F FWD] key to make "09-16" flashing.

<Caution>

If you select the same track(s) for both the left and right columns (for example, "04<=>04", "01&02<=>01&02" or "01-08<=>01-08"), you cannot carry out a track exchange. "Select Err" appears on the display and the display re- turns to the previous one.

Flashing

2.Turn the [JOG] dial to select “09-16” or “17-24” to flash on the display.

Flashing

3.Press the [ENTER/YES] key.

The tracks are instantly exchanged.

Completed!” appears on the display when the tracks are successfully exchanged. Then the LCD returns to the original time base display.

• Exchange in mono or 2-track units

1.Turn the [JOG] dial while “1-8” is flashing.

You can select among mono tracks (1 through 24) and stereo 2 tracks (1&2, 3&4, .... 23&24), as well as 8 tracks. The right column shows the same unit, according to the selection on the left column as shown in the figure below. Therefore, you should select track(s) in the left column first and then select track(s) in the right column.

3.Press the [ENTER/YES] key.

The tracks are instantly exchanged.

Completed!” appears on the display when the tracks are successfully exchanged. Then the LCD returns to the original time base display.

Flashing

Flashing

2.Press the [HOLD/>] or [F FWD] key to make the right column flash, and select the desired track(s) using the [JOG] dial.

<Note>

The numbers on the right and left of mono tracks mean the same thing, therefore, the numbers can be reversed and still mean the same thing.

In other words, “04<=>01” and “01<=>04” mean the same thing. This representation means that tracks 1 and 4 will be exchanged, regardless of which number comes first.

77

Page 77
Image 77
Fostex VF160EX Exchange in 8-track units, Exchange in mono or 2-track units, Turn the JOG dial while 1-8 is flashing