Fostex VF160EX Drive Format Information Drive Information, Fader Fix Mode Setting Fader Fix, 144

The Drive Format Information [“Drive Information”]

Format information of the current drive currently installed can be checked by using the “Drive Format Information” menu. Should any trouble occur in the VF160EX, providing the information obtained here to our nearest Fostex Service Station will be of great help in giving quick service.

The following items will be displayed and can be confirmed.

1.Manufacture / Model of the currently installed hard disk.

2.Format method

3.Format type

4.Simultaneously recordable number of tracks

5.Number of bits at formatting

6.Sampling frequency at formatting

7.Present number of programs

8.Present number of free blocks

9.Audio file / maximum number of events and its program No.

10.Specific capacity of the drive

11.Remaining capacity of the drive

12.Present software version

1. Select “Drive Information” in the menu selection display and press the [ENTER/YES] key.

It will change to the "Drive Information" second level and the current drive information currently in use will be displayed (The ▼ symbol indicates there is data below).

2.As the [JOG] dial is rotated, information will be displayed one by one.

3.Press the [EXIT/NO] key (or [STOP] key) to exit from the SETUP mode.

Fader Fix Mode Setting [“Fader Fix”]

Whether the fader manipulation should be reflected on the sound volume or not can be set. The setup content will be held even if the main power is switched off.

<Caution>

The “Fader Fix Mode” can be made to function when set in other (CH, MST or CH & MST) than “Off” of the next item on the “Fader Recall Mode”.

• Initial setting:	“Off”
• Options:	“On” or “Off”

*You can set the value for each Program individually.

*The settings can be saved and loaded as part of the song data.

*The settings are maintained after you turn off the power to the VF160EX.

2.Select the desired item with the [JOG] dial and press the [ENTER/YES] key.

The selected item will be set.

On	For all modes, manipulation of the
	Channel fader/Master fader will
	have not affect on the sound volume.
	Any accidental shifting of the fader
	position by vibration and
	misoperation can be prevented.
Off (Initial setting)	Manipulation of the Channel fader/
	Master fader will affect the sound
	volume.

1. Select “Fader Fix” in the menu selection display and press
the [ENTER/YES] key.	3. Press the [EXIT/NO] key (or [STOP] key) to exit from the
The currently set will flash. “Off” will flash in the initial	SETUP mode.
setting.

Flashing

144