Fostex VF160EX Items that can be saved or loaded as song data, 107, Memory data, Setup mode

<Items that can be saved or loaded as song data>

•Memory data:

Data for CLIPBOARD IN/OUT, AUTO RTN START/END, AUTO PUNCH IN/OUT.

Locate data (for Locate No. 00 through 99, only available with save/load using CD-RW/CD-R)

•Time base:

ABS, MTC or BAR/BEAT/CLK

•SETUP mode:

Bar/beat setting, tempo setting, metronome on/off, preroll time, MIDI synchronization output signal setting, MTC offset time, MTC offset mode, REC protect setting, slave mode on/off, slave type setting

<Items that cannot be saved or loaded as song data>

•On/off settings for Auto play mode and Auto return mode

•Vari pitch on/off and pitch data

•SETUP mode:

DIGITAL IN and DIGITAL OUT settings, bar/beat resolution on/off and device ID

Save/load of song data using the S/P DIF or adat digital signal

<Notes for DAT and adat machines to be used>

The VF160EX song data only can be saved to or loaded from a digital machine that can record 16 bit, 44.1 kHz linear digital data with S/PDIF or adat format (such as DAT and adat machines).

<Notes for saving data using the S/PDIF or adat digital signal>

When saving all data including both real and Additional track data using the S/PDIF or adat digital signal, note the following.

Only the data recorded within the time duration between ABS 0 and REC END of the Real tracks is saved. Therefore, if the recorded time of Additional tracks is longer than the Real tracks, only the Additional track data within the time duration between ABS 0 and REC END of the Real tracks is saved.

In the example shown on the right, the Additional tracks have data from "00m 00s" to "10m 00s", while the Real tracks have data from "00m 00s" to "07m 00s".

Additional

tracks

Save

Real tracks

Seven minutes

DAT or adat

If you are going to save all tracks, the Additional track data from "00m 00s" to "07m 00s" will be saved but the rest will not be saved.

REC END (10m 00s) of

additional track

REC END (07m 00s) of

real track

107