Fostex VF160EX operation manual 100, Selecting a program in the chain play list

Selecting a program in the chain play list

If the play mode is set to any option but “Off”, you can select a program only from those set to the chain play list. By selecting a program, you can start chain play from the desired step in the chain play list.

<Note>

If you want to select any program on the disk, as usual, turn off the power and then on, or set the chain play mode to “Off” (see “Setting the chain play mode”).

In the following procedure, it is assumed that the chain play list has been made, the play mode is set to an option but “Off”, and the program set to the first step of the chain play list is loaded.

1.While the recorder is stopped, press the [PGM SEL] key.

After showing “Select Change No!” immediately, the display changes to show the screen as below, on which the current program list number and “Sure?” flash. In this condition, you can select another program set in the list by rotating the [JOG] dial.

2.Use the [JOG] dial to select the desired step and press the [ENTER/YES] key.

The program set to the selected step is loaded and the recorder is stopped at the beginning of the program (ABS 0), while the display shows the Normal screen.

In the screen examples below, program 4 (P04) set to step 4 (C04) is selected.

As described above, by selecting a program while the chain play mode is set to any option but “Off”, you can start chain play from the desired program.

Editing the chain play list

You can replace a program in the chain play list with another program, delete a program from the list, or add a new program to the list.

• Deleting (or replacing) a program in the chain play list

You can delete a desired program from the chain play list or replace a program in the list with another program by following the procedure below.

1.While the recorder is stopped, press the [SETUP] key to enter the setup mode.

The screen for selecting a menu item in the setup mode appears.

2.Use the [JOG] dial to select“Chain Play List”, and press the [ENTER/YES] key.

The display changes to shows the “Chain Play List” screen as below.

3.Use the [JOG] dial to select the step you want to edit, and press the [ENTER/YES] key.

The program number set to the selected step starts flashing.

In the example below, “P03” which is set to step 3 (C03) is flashing.

4.Use the [JOG] dial to select“DEL”(or a desired program) and press the [ENTER/YES] key.

To delete the program from the chain play list, select “DEL”. To replace the program with another program, select a desired program.

100