Fostex VF160EX operation manual Switching with Disp SEL Key, Normal Display of Current Time Base

Switching with [DISP SEL] Key	*1. The REMAINING time display appears as follows
		according to the time base that has been selected.
Every time the [DISP SEL] key is pressed the LCD
alternately shows the “1. Normal Display of Current Time
Base” -> “2. REMAIN Display of Current Time Base” -> “3.
MTCTime Display Input”. The description of each display
is defined below.

1. Normal Display of Current Time Base

*Current time according to current time base.

*Program number and program title.

The first 9 characters of the program title are shown.

*Scene number and scene name.

The first 9 characters of the scene name are shown.

*Level meter of tracks 1 to 16.

*L/R master level meter

2. REMAIN Display of Current Time Base

*REMAIN time and space available in mono-track converted units according to the current time base (the following is the case in ABS).*1

*Format type.

*Name of hard disk.

*Level meter of tracks 1 to 16.

*L/R master level meter.

3. MTC Time Display Input

*MTC time input.

“00H 00M 00S 00F” appears if there is no time input.

*Program number and program title.

The first 16 characters of the program title are shown.

*Scene number and scene name.

The first 16 characters of the scene name are shown.

*Level meter of tracks 1 to 16.

*L/R master level meter.

Time Base: ABS and MTC

Time Base: BAR/BEAT/CLK

*2. Icons of the program setup details appear at the right side of the menu. Refer to examples below.

This indicates recording/no recording setup by the “Rec Protect” menu. The icon shown here is indicating that it is presently set “Off” and thus recording is possible.

This is indicating the VF160EX sampling frequency (Fixed to 44.1kHz).

The icon here is indicating that the current drive is set to an “E-IDE hard disk.”

This indicates the MIDI sync output signal setup by the “Midi Sync Out” menu. The icon here is indicating that it is presently set to “CLK.”

This indicates the slave type setup by the “Slave Type” menu.

This icon is indicating that it is presently set to “VARI.”

Frame rate figure setup by the “MTC Frame Rate” menu is indicated here. The icon here is indicating that it is presently set to “25 Frames.”

30