• Change the “CLIPBOARD OUT point”.

9.When the unit is stopped, press the [F FWD] key while holding down the [STOP] key.

The unit immediately locates the “REC END point”.

10.Press the [STORE] key followed by the [CLIPBOARD OUT] key.

The “REC END point” is now registered as the “CLIPBOARD OUT point”.

The display returns to the Normal display.

By changing the “CLIPBOARD OUT point”, you can now cre- ate an audio CD without loosing the last part.

When mixdown starts from non-“ABS 0”

You can make a silence at the beginning of a program which is not mixed down from “ABS 0” by setting the “CLIPBOARD IN point” appropriately.

In the following description, we assumed that the cur- rent program is a 5-minute length program which is mixed down from “ABS 00M 10S 00F 00SF”, in which the [CLIPBOARD IN] and [CLIPBOARD OUT] keys hold “00M 10S 00F 00SF” and “05M 10S 00F 00SF” respec- tively, and audio immediately starts from “00M 10S 00F 00SF”.

And you are now going to create a 3-second silent space at the beginning of the song.

• Change the “CLIPBOARD IN point”.

1.When the unit stopped, press the [CLIPBOARD IN] key.

The time registered with the [CLIPBOARD IN] key is shown (in this tutorial, “ABS 00M 10S 00F 00SF”), and “S” on the display flashes, showing that you can now edit the “second” field.

Flashing

2.While “S” flashes, enter “07” using the [JOG] dial.

3.Press the [STORE] key followed by the [CLIPBOARD IN] key.

00M 07S 00F 00SF” is registered with the “CLIPBOARD IN point”.

Now you made a 3-second silent space at the beginning of the song by changing the “CLIPBOARD IN point”.

See “Making an audio CD” in “Save/load using CD-RW/CD-R described later for details about how to make an audio CD from the mixed-down song.

84

Page 84
Image 84
Fostex VF160EX Change the Clipboard OUT point, Change the Clipboard in point, When mixdown starts from non-ABS