Fostex VF160EX Menu shown when turning power on, Switching the Time Base, Normal display

LCD

The following describes the contents shown on the LCD and their operations.

Menu shown when turning power ON

When the VF160EX is turned ON with a hard disk already formatted, the following menu will appear in order: [Initial... (Initializing)] & [Version] -> [Current Dr] -> [IDE] -> [Name of Hard disk (Instantly)] -> [Recording mode (Standard or Quick)].

The head of the program (ABS 0) will then start up at the time base when the power was turned OFF.

The LCD menu appearing immediately after turning the power ON is called the “Normal Display”.

The “Normal Display” shows the following items for the

3 time bases:

*Current Location/Program Number & Program Title

*Scene Number & Scene Name

*Level Meter of Tracks 1-16

*Stereo OUT L/R Master Level/Meter

Switching the Time Base

The user can switch between time bases, by pressing the [DISP SEL] key, while the [SHIFT] key is depressed. In this case the time base alternates in the order of “1. ABS” -> “2. BAR/BEAT/CLK” -> “3. MTC” ->... The normal display always appears when the time base is switched. Make use of these displays accordingly.

Time Base: Normal Display in ABS.

Normal display

Time Base: Normal Display in BAR/BEAT/CLK.

Time Base: Normal Display in MTC.

29