Fostex VF160EX Selecting pre/post of AUX sends, Controlling AUX Send level, Key, above

5.After completing the pre/post selection, press the [EXIT/ NO] key.

Selecting pre/post of AUX sends

The VF160EX exits the channel edit mode and the display returns to the Normal display.

Controlling AUX SEND level

You can control send levels of channels 1 through 16 (pre- or post-fader) from the [AUX SEND] jack on the rear panel. The master channel controls the AUX send master level.

1.Press the [AUX1/AUX2] key to bring up the AUX send level screen.

Each time you press the [AUX1/AUX2] key, the AUX1 send level and AUX2 send level screens alternate.

The first time you bring up the channel parameter edit screen, the message prompting to select a channel ("Select CH!") flashes, as well as all the CH STATUS/CH SEL indicators on the panel flash. From the second time on, the previously selected channel is selected and ready to be edited when bringing up the screen (as shown in the drawing of step 2 below).

You can select whether the pre-fader or post-fader sig- nal is fed from each channel (1 to 16) to the [AUX SEND] jack. If you select "Post", the signal adjusted by the chan- nel fader is sent to the effect processor, so if you lower the channel fader, the signal sent to the effect proces- sor is also lowered.

If you select "Pre", the signal that is not affected by the channel fader is sent to the effect processor, so even if you lower the channel fader to minimum, the signal can be sent to the effect processor.

1.Press the [AUX1/AUX2] key while holding down the [SHIFT] key to bring up the pre/post selection screen.

Each time you press the [AUX1/AUX2] key while holding down the [SHIFT] key, the pre/post selection screens for EFF1 and EFF2 alternate. The first time you bring up the channel parameter edit screen, the message prompting to select a channel ("Select CH!") flashes, as well as all the CH STATUS/CH SEL indicators on the panel flash.

From the second time on, the previously selected channel is selected and ready to be edited when bringing up the screen (as shown in the drawing of step 2 below).

Flashing

Flashing

2. Press the [CH STATUS/CH SEL] key of the desired
channel.	2. Press the [CH STATUS/CH SEL] key of the desired
The current settings are shown, together with the selected
	channel.
channel name. The icon for the selected channel is
	The current settings are shown, together with the selected
flashing, indicating that you can edit it.
	channel name. The icon for the selected channel is
Flashing	flashing, indicating that you can edit it.
Flashing	Flashing

Flashing

If two adjacent channels are fader-paired, pressing one
of the [CH STATUS/CH SEL] keys for these channels selects
	If two adjacent channels are fader-paired, pressing one
both channels and you can adjust levels for both chan-
nels simultaneously. See page 146 for details about how	of the [CH STATUS/CH SEL] keys for these channels selects
to pair faders of adjacent two channels.	both channels and you can set PRE or POST for both
3. Use the [JOG] dial to control the send level.	channels simultaneously. See page 146 for details about
	how to pair faders of adjacent two channels.

The numeric value and the marker position of the rotary		3. Use the [JOG] dial to switch the selection.
pot icon change according to the current level. ("80", the
default value, is the reference level.)		The icon color and label changes according to the
		selection, as shown below.
	•Controllable channels:
	Channels 1 through 16 and the master level.				The pre-fader signal is fed to the AUX SEND
					jack.
	•Available values:
					The post-fader signal is fed to the AUX SEND
	00 to 99 (dB), (the default setting: channels 1 through				jack.
	16: “00”, master level: “80”)
			•Controllable channels:
4. To set another channel's send level, repeat steps 2 and
				Channels 1 through 16.
3 above.
			•Available options:
5. After completing send level editing, press the [EXIT/NO]				PRE or PST (post) (default: all channels: “PST”)
key.		4. To set another channel's pre/post selection, repeat steps
The VF160EX exits the channel edit mode and the display
returns to the Normal display.		2 and 3 above.

53