JVC MX-SK1 Selecting the Sources, Reinforcing the Bass Sound ACTIVE BASS EX, Adjusting the Volume

English

Continued

Selecting the Sources

To listen to the FM/AM broadcasts, press FM/AM.

(See page 12.)

To playback CDs, press DISC 3¥8. (See pages 13 – 16.) To playback tapes, press TAPE-A 2 3 or TAPE-B 2 3. (See page 23.)

To select the external equipment as the source, press AUX.

SELECT

Reinforcing the Bass Sound (ACTIVE BASS EX.)

The richness and fullness of the bass sound is		ACTIVE
maintained regardless of how low you set the	ACTIVE	BASS EX
	BASS EX.	OR
volume.
You can use this effect only for playback.

To get the effect, press ACTIVE BASS EX. (Extension). ACTIVE BASS EX. indicator lights up on the display. To cancel the effect, press the button again.

ACTIVE BASS EX. indicator lights up.

When you press the play button for a particular source (FM/AM, DISC 3/8, TAPE-A 2 3, TAPE-B 2 3 and AUX), the unit turns on (and the unit starts playing the source if it is ready — COMPU PLAY CONTROL).

About the audio level indicator

All the audio level indicators light up when no signals come in. The audio level indicators light up when no signal comes in during AUX. The audio level indicators does not represent actual audio level. This is not a spectrum analyzer display.

Adjusting the Volume

You can adjust the volume level only while the unit is turned on. The volume level can be adjusted in 32 steps (VOL MIN, VOLUME 1 — VOLUME 30 and VOL MAX).

Turn VOLUME + / – clockwise (+) to	U
	VOL ME
increase the volume or	VOLUME
counterclockwise (–) to decrease it.	OR

ACTIVE

BASS EX.

Emphasizing the sound (SOUND TURBO)

High and low frequencies are highly boosted. To get the effect, press SOUND TURBO.

SOUND TURBO indicator lights up on the	SOUND
display.	TURBO
	OR

To cancel the effect, press the button again.

SOUND TURBO indicator lights up.

SOUND

TURBO

When using the remote control, press VOLUME + to increase the volume or press VOLUME – to decrease it.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on headphones.

DO NOT turn off (on standby) the unit with the volume set to an extremely high level; otherwise, a sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source next time. REMEMBER you cannot adjust the volume level while the unit is on standby.

To turn down the volume level temporarily

Press FADE MUTING on the remote control.	FADE
	MUTING
The volume level gradually decreases to
“VOL MIN.”
To restore the sound, press the button again.

Select Sound Turbo function will turn the Sound Mode off. While the Sound Turbo turns off, the Sound Mode automatically restores to previous setting.

– 10 –