JVC CA-MXSK3, MX-SK3 29, English, Adjust the clock if you need, Press STANDBY/ON or, turned on

Models: GVT0120-001C CA-MXSK1 SP-MXSK3 SP-MXSK1 CA-MXSK3 MX-SK1 MX-SK3

1 116
Download 116 pages 58.06 Kb
Page 72
Image 72
Manual background
DAILY TAPE
REC TUNER

Continued

English

4 Select the timer (Daily Timer or Recording Timer) with the source to play.

On the unit:

Press 4 PREV. or ¢ NEXT to select the timer, then press CLOCK/TIMER.

Each time you press (¢) or (4), the timer mode and the source change as follows:

Manual backgroundManual backgroundDAILY TUNERManual backgroundManual backgroundManual backgroundREC TUNER Manual background

Manual backgroundManual backgroundDAILY TAPEManual backgroundManual backgroundManual backgroundDAILY CDManual background

6 Adjust the clock if you need.

• See "Setting the Clock" on page 9.

7 Press STANDBY/ON (or

STANDBY/ON

STANDBY/ON on the unit) to

 

turn off the unit (standby) if you

 

have set the timer with the unit

 

turned on.

 

When the timer turns on the unit, the Manual background (timer) indicator starts flashing. (If the Recording Timer is selected in step 4, the REC indicator also starts flashing.)

DAILY TUNER: Tunes in to the last station you were listening to. (Daily Timer)

: Records the last station you were listening to. (Recording Timer).

Put a recordable cassette into the deck.

DAILY CD : Plays a disc. (Daily Timer)

Load a disc.

: Plays a tape. (Daily Timer)

Make sure that the tape is in the cassette deck.

Make sure that the tape direction is correct.

The unit enters the volume level setting mode.

5 Select the volume level.

On the unit:

Press 4 PREV. or ¢ NEXT to set the volume level, then press CLOCK/TIMER.

You can select the volume level (“VOLUME --” and “VOLUME 0” to “VOLUME 30”).

If you select “VOLUME--,” the volume is set to the previous level when the unit was turned off.

To turn off the volume while the Recording Timer (REC TUNER) is working, set the volume level “VOLUME 0”.

To deactivate the timer temporarily,

press and hold CLOCK/TIMER on the unit until the Manual background (timer) indicator on the display goes off.

To activate or change the timer (with the previous setting), follow steps 1 to 7 on pages 28 and 29

If you want to change the timer setting after the Daily Timer has been set, deactivate the timer then set it again.

If the unit is turned on when the on-time comes Timer does not work.

Even if you unplug the power cord or if a power failure occurs

The timer will be cancelled. You need set the clock first, then the timer again.

The unit enters the clock setting mode.

– 29 –

Page 72
Image 72
JVC CA-MXSK3, MX-SK3 29, English, Adjust the clock if you need, Press STANDBY/ON or, STANDBY/ON on the unit to, turned on