JVC SP-MXSK1, MX-SK3, MX-SK1, CA-MXSK3, SP-MXSK3, CA-MXSK1, GVT0120-001C manual Playing Back Tapes

Close the cassette holder gently.

Playing Back Tapes

English

You can playback type I, type II and type IV tapes without changing any settings.

Playing Back a Tape

1 Press EJECT (0) for the deck you want to use.

For Deck B

For Deck A

To play both sides repeatedly — Reverse Mode

Reverse Mode works for both decks at the same time.

When it is in use, the tape automatically reverses at the end of a side and the unit starts playing the other side of the tape, and repeats the same process.

To use Reverse Mode, press REVERSE MODE.

The Reverse Mode indicator on the display lights up —	.
To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator on the display lights up — .

: Play one direction only.

: Play both sides of current deck.

2 Put a cassette in with the exposed part of the : Play DECK A and DECK B repeatedly.

tape down.

When Reverse Mode is on with cassettes in both decks

A and B

After the reverse side of the tape finishes playing, the tape in the other deck starts playing.

3

4 Press TAPE–A 2 3 or TAPE–B 2 3 for the deck you want to use .

The tape play starts and the tape direction indicator or

starts flashing slowly to indicate the tape running direction.

•Each time you press the button, the tape direction changes.

: plays the forward side.

: plays the reverse side.

•If no cassette is inserted in current deck then “DECK A” or “DECK B” and “NO TAPE” will start blinking on the display.

When the tape plays to the end, the deck automatically stops or reverse play depends on the setting of Reverse Mode. (See “To play both sides repeatedly — Reverse Mode.”)

To stop playing, press 7.

To fast forward or fast reverse, press +/¡ or 1/– (or

¢(NEXT ¡) / 4(PREV. 1) on the remote control). The tape direction indicator or starts flashing quickly on the display.

To remove the cassette, press 0 EJECT for deck A or

EJECT 0 for deck B.

– 23 –