JVC SP-MXSK3 Playing Back Video CDs, 17, Playing a Video CD, Loading Discs, English, Prepare a CD

Playing Back Video CDs

English

Selecting Video Output (PAL, PAL AUTO, NTSC)

You can set this setting in Standby mode.

Before playing a VCD, use the buttons on the unit to select a video output mode to match your TV system.

Video output is preset for PAL.

Relationship among the playable CDs, System’s TV output mode and your TV’s color system:

Playable CD	Player’s TV output mode	Your TV’s color system
NTSC/PAL	NTSC	NTSC
NTSC/PAL	PAL	PAL
NTSC/PAL	PAL AUTO	Multisystem
	1	2	3

1 Turn off the power to put the System into Standby mode.

2 Press and hold the 7 button on the Unit for more than 2 seconds.

The current TV output mode (“NTSC” for example) appears on the display for five seconds.

3 Press DISC SKIP and place the next CD.

When you press the button, the tray turns for the next CD.

4 Repeat steps 3 for the last CD.

5 Press CD Open/Close 0.

The tray is closed.

When you place a CD onto the currently selected tray, whose disc number shown on the CD indicator, reading of the CD starts. After the reading is completed, the total number of tracks and total playing time will appear, then the playing time of the first track.

		\*VIDEO CD
	\			«
READING NOW	Total number of tracks		Playing time of the
	and playing time		1st track

*VIDEO CD or AUDIO CD

If the video CD has the Playback Control function, “VCD PBC” will appear when you press 7 followed by PBC and DISC 3¥8.

To put an 8 cm CD onto a tray, insert it so that it is aligned with the groove in the trays center.

If a tray is opened when the System switches to the standby mode, the tray will close automatically.

3 Within five seconds, press the TUNING

+/¡ or TUNING 1/– button on the Unit			Playing a Video CD
to select the System’s TV output mode.
Each time you press the button, the TV output mode
			You can play video CDs either with or without the PBC
changes as follows:
			function.
NTSC	PAL	PAL AUTO (back to beginning)

NTSC:	for NTSC exclusive TV
PAL:	for PAL exclusive TV

PAL AUTO:for multisystem TV

4 Press 7 button to confirm selected TV output mode.

1 Turn on the TV and select the video input so that you can view the pictures from the CD player.

Refer to the manual supplied for your TV.

2 Prepare a CD.

Refer to “Loading Discs” on this page.

Loading Discs

1 Press CD Open/Close 0.

The unit automatically turns on and the disc tray comes out.

2 Place a disc correctly within the circle of the disc tray, with its label side up.

Label side up

3 Start playback of the CD.

Press DISC 3¥8, to start playback of the currently selected CD, or press DISC 1-3, to select the disc and start playing.

Compu Play

When DISC 3¥8, or DISC 1-3, is pressed while the system is on standby, the power is automatically turned on.

To stop during play, press 7.

To stop playing and remove the disc, press 7 and then 0

for the disc being played.

•When using a CD single (8 cm), place it within the inner circle of the disc tray.

–17 –