JVC SP-MXSK3 14, Playing Back the Entire Discs — Continuous Play, Basic CD Operations, Load CDs

English

Continued

Playing Back the Entire Discs

— Continuous Play

1 Load CDs.

2 Press one of the disc number buttons (DISC 1, DISC 2 and DISC 3) for the disc you want to play.

CD starts playing from the first track of the selected disc.

Elapsed playing time

Track number Selected disc indicator

1 2 3

To stop playing for a moment SELECT

Press DISC 3¥8.

While pausing, the elapsed playing time flashes on the display.

To resume playing, press DISC 3¥8.

To go to another track

Press 4 or ¢ before or during playback (or press ¢ (NEXT ¡) /

4(PREV. 1) on the remote control).

• 4: Goes back to the beginning of the current or previous tracks.

• ¢: Skips to the beginning of the next or succeeding tracks.

If you press and hold (on the unit only) 4or ¢ before playing

You can change the tracks continuously.

•Pressing DISC 3/8 instead of the disc number buttons starts playing back if a CD is on the tray.

•Playing back the CD using the DISC SKIP button. You can also play the CDs using the DISC SKIP button. During playback, each time you press the button, the next CD is automatically played back.

To stop playing, press 7.

To remove the disc, press 0. (If the CD is playing, stop the CD before 0 is pressed.)

CD playback sequence

When 3 CDs* are loaded on the disc tray, they are played in one of the following sequences.

•When DISC 1 is pressed: DISC 1 ] DISC 2 ] DISC 3 (then stops)

•When DISC 2 is pressed: DISC 2 ] DISC 3 ] DISC 1 (then stops)

•When DISC 3 is pressed: DISC 3 ] DISC 1 ] DISC 2 (then stops) * When only 2 CDs are loaded, they are played in the same order,

but the disc tray without a CD is skipped.

Total Number of Contents (TOC) reading

STOP button does not function during CD changing time and TOC reading (about 10-20 seconds). You can press STOP button only after playing time start counting on the display.

If no CD is placed on the disc tray, “NO DISC” appears on the display.

Basic CD Operations

While playing a CD, you can do the following operations.

To remove/change the CDs during playback

While playing back a CD (e.g. DISC 1), you can remove or change the other CDs (e.g. DISC 2 and DISC 3) by pressing

0. After removing or changing, press the same button to close the tray.

To locate a particular point in a track

On the remote control:

During play, press and hold ¢ (NEXT ¡) or 4 (PREV. 1). On the unit:

Press TUNING +/¡ or 1/–.

•TUNING1/– (or 4 (PREV. 1)): Fast reverses the disc.

•TUNING+/ ¡ (or ¢ (NEXT ¡)): Fast forwards the disc.

•There are 4 searching speed:

•X1 – 2 seconds search

•X2 – 5 seconds search

•X3 – 10 seconds search

•X4 – 20 seconds search

To go to another track directly using the number buttons

Pressing the number button(s) on the remote control before or during play allows you to start playing the track number you want.

Ex.: For track number 5, press 5. For track number 15, press +10,

then 5. For track number 20, press +10,

then 10. For track number 32, press +10,

+10, +10, then 2.

Total time and total number of tracks will only appear on the display at the following condition:

(1)Power ON in CD mode using standby button.

(2)New CD inserted into the current tray and the tray closed using the eject button.

*The above only apply for audio CD and VCD.

(3)Search speed might be different for different type of discs.

– 14 –