JVC MX-SK1 Using the Timers, Using Daily Timer and Recording Timer, English, Press CLOCK/TIMER

Models: GVT0120-001C CA-MXSK1 SP-MXSK3 SP-MXSK1 CA-MXSK3 MX-SK1 MX-SK3

1 116
Download 116 pages 58.06 Kb
Page 71
Image 71
Manual background

English

Using the Timers

There are three timers available — Daily Timer, Recording On the unit ONLY:

Timer and Sleep Timer.

1 Press CLOCK/TIMER.

 

Before using the timers, you need to set the clock built in the unit. (See page 9.)

Using Daily Timer and Recording Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.

Manual background indicator lights up and DAILY (Daily Timer) indicator also starts flashing on the display.

Manual backgroundDAILYManual background

How Daily Timer works

The unit automatically turns on, sets the volume level to the preset level, and starts playing the specified source when the on-time comes (the Manual background indicator flashes just before the on- time, and continues flashing while the timer is operating). Then, when the off-time comes, the unit automatically turns off (on standby).

The Daily timer works everyday automatically. If you do not want to use the Daily timer, turn off the Daily timer. (See “To deactivate the timer temporary” on page 29.) The timer setting remains in memory until you change it.

There is a time limit in performing the following steps. If the setting is cancelled before you finish, start from step 1 again.

To correct a misentry, deactivate the timer and start from step 1 again.

Before you start...

When using a CD as the source to play —

Make sure there is a CD on the selected disc number tray.

When using a tape as the source to play —

Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

Make sure that the tape direction is correct.

2 Set the on-time you want the unit to turn on at.

1) Press 4 or ¢ to set the hour, then press CLOCK/ TIMER.

2)Press 4 or ¢ to set the minute, then press CLOCK/ TIMER.

3 Set the off-time you want the unit to turn off (on standby) at.

1)Press 4 or ¢ to set the hour, then press CLOCK/ TIMER.

2)Press 4 or ¢ to set the minute, then press

CLOCK/TIMER.

The unit enters source selecting mode.

Manual backgroundManual background REC Manual background

– 28 –

Page 71
Image 71
JVC MX-SK1 Using the Timers, Using Daily Timer and Recording Timer, English, Press CLOCK/TIMER, How Daily Timer works