JVC CA-MXSK3 25, Dubbing Tapes, CD Direct Recording, On the unit ONLY, English, Press DUBBING

Put a recordable cassette into deck B. Load CDs.

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse Mode indicator lights up – .

•When using Reverse Mode for recording, start recording in the forward direction first. Otherwise, recording will stop when recording is done only on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up – .

Dubbing Tapes

You can record from one tape to another.

On the unit ONLY:

1 Press either TAPE–A 2 3 or TAPE–B 2 3, then 7.

English

CD Direct Recording

Everything on the CD goes onto the tape according to the order of the CD.

On the unit ONLY:

1

2

3 Press one of the disc number buttons (DISC 1, DISC 2 and DISC 3) to select the disc, then 7.

4 Press DISC REC START.

“DISC REC START” appears, and the (recording) indicator lights up on the display. Deck B starts recording and the CD player starts playing. When the recording is done, “DISC REC FINISHED” appears on the display and deck B stop.

To stop recording, press REC START/STOP or 7. So that a 4-second blank portion is created on the recording tape.

2 Put the source cassette into deck A, and a recordable cassette into deck B.

•Put the cassettes in both decks so that the tapes will run in the forward direction.

3 Press DUBBING.

The (recording) indicator lights up on the display and dubbing starts.

To stop dubbing, press 7 so that both decks (A and B) stop.

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse Mode indicator lights up – .

To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator lights up – .

•Before recording on a tape, wind the tape on past the leader tape (about the first 3 or 4 seconds of each side).

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse Mode indicator lights up like – .

•When using the Reverse Mode for CD Direct Recording, start recording in the forward direction first. When the tape reaches its end while recording a song in the forward direction , the last song will be re-recorded at the beginning of the reverse side .

If you start recording on the reverse side , recording will stop when recording is done only on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up – .

– 25 –